Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

安装式结晶环™-10微米

Applications
Cryocrystallography

应用 :冰晶术
Features
Synthetic CryoLoop on stainless steel MicroTube
MicroTube specially engineered with EasySnap notches

特征:
不锈钢微管上的合成冷冻环
EasySnap缺口专用微管
Description 
Mounted CryoLoops with 10 micron diameter nylon. The 10 micron Mounted CryoLoop shows less background diffraction than the 20 micron Mounted CryoLoop. Please note that the 10 micron Mounted CryoLoops are very flexible due to their small diameter. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.

Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicrozTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.

描述
装有10微米直径尼龙的冷冻鞋。10微米安装的Cryoloop比20微米的Cryoloop显示更少的背景衍射。请注意,这10微米安装的深水艇是非常灵活的,因为他们的小直径。这些尼龙环是结合在中空的不锈钢微管™,用于安装,冻结,并确保晶体在冰晶过程和X射线数据收集。微管的长度是24毫米,是专门设计的EasySnap™缺口在10,12,14,18和21毫米的措施。要获得所需的微管长度,只需将微管按所需的长度并使用环氧树脂或类似的粘合剂固定在晶体帽上即可。这些尼龙环显示最小的衍射,是薄的快速冻结,强大,空气动力学。

大多数数据收集几何学喜欢或需要22毫米的长度之间的盖子和梁。使用晶体帽、结晶帽ALS、结晶帽ALS HT和结晶帽脊骨HT的22 mm总长度,从底部的第二个缺口折断微管,用环氧树脂或类似的粘合剂制造18毫米的微管长度并固定在晶体帽上。使用结晶帽铜、结晶帽铜HT、结晶帽ALS铜HT超长22毫米,用环氧树脂或类似的粘合剂将第五个缺口处的微管从底部(最接近低温环的缺口)折断,并固定到结晶帽上。

CAT NO NAME DESCRIPTION
HR4-994 Mounted CryoLoop – 10 micron 0.025-0.05 mm – 25 pack
HR4-995 Mounted CryoLoop – 10 micron 0.05 – 0.1 mm – 25 pack
HR4-997 Mounted CryoLoop – 10 micron 0.1 – 0.2 mm – 25 pack
HR4-999 Mounted CryoLoop – 10 micron 0.2 – 0.3 mm – 25 pack

References  参考文献
1.A novel approach to micro-sample X-ray powder diffraction using nylon loops. Reibenspies and Bhuvanesh. J. Appl. Cryst. (2003). 36, 1480-1481.