Hampton research代理 HR4-313 Mounted CryoLoop – 20 micron
Mounted CryoLoop™ – 20 micron
APPLICATIONS
- Cryocrystallography
FEATURES
- Synthetic CryoLoop on stainless steel MicroTube
- MicroTube specially engineered with EasySnap notches
- Complete range of loop diameters from 0.025 – 1.0 mm
- Compatible with all CrystalCap Systems
DESCRIPTION
Note: If you are using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT, or CrystalCap SPINE HT, save time and money by using the ready to mount 18 mm Mounted CryoLoop.
Mounted CryoLoops with 20 micron diameter nylon. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic..
Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.
安装式冷冻环™-20微米
应用
- 冰晶术
特征
- 不锈钢微管上的合成冷冻环
- EasySnap缺口专用微管
- 环形直径范围为0.025~1.0mm
- 兼容所有的水晶帽系统
描述
注：如果您使用的是水晶帽，水晶帽ALS，水晶帽ALS HT，或水晶帽脊柱HT，节省时间和金钱，使用准备安装18毫米安装的冷冻环。
装有20微米直径尼龙的冷冻鞋。这些尼龙环是结合在中空的不锈钢微管™，用于安装，冻结，并确保晶体在冰晶过程和X射线数据收集。微管的长度是24毫米，是专门设计的EasySnap™缺口在10，12，14，18和21毫米的措施。要获得所需的微管长度，只需将微管按所需的长度并使用环氧树脂或类似的粘合剂固定在晶体帽上即可。这些尼龙环显示小的衍射，是薄的快速冻结，强大，空气动力学。
大多数数据收集几何学喜欢或需要22毫米的长度之间的盖子和梁。使用晶体帽、结晶帽ALS、结晶帽ALS HT和结晶帽脊骨HT的22 mm总长度，从底部的第二个缺口折断微管，用环氧树脂或类似的粘合剂制造18毫米的微管长度并固定在晶体帽上。使用结晶帽铜、结晶帽铜HT、结晶帽ALS铜HT超长22毫米，用环氧树脂或类似的粘合剂将第五个缺口处的微管从底部(最接近低温环的缺口)折断，并固定到结晶帽上。
| HR4-313 | Mounted CryoLoop – 20 micron | 0.025 – 0.05 mm – 25 pack |
| HR4-625 | Mounted CryoLoop – 20 micron | 0.05 – 0.1 mm – 25 pack |
| HR4-955 | Mounted CryoLoop – 20 micron | 0.1 – 0.2 mm – 25 pack |
| HR4-957 | Mounted CryoLoop – 20 micron | 0.2 – 0.3 mm – 25 pack |
| HR4-959 | Mounted CryoLoop – 20 micron | 0.3 – 0.4 mm – 25 pack |
| HR4-961 | Mounted CryoLoop – 20 micron | 0.4 – 0.5 mm – 25 pack |
| HR4-963 | Mounted CryoLoop – 20 micron | 0.5 – 0.7 mm – 25 pack |
| HR4-965 | Mounted CryoLoop – 20 micron | 0.7 – 1.0 mm – 25 pack |
| HR4-953 | Mounted CryoLoop – 20 micron | Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm) |
REFERENCES
1. FeeM, an N-acyl amino acid synthase from an uncultured soil microbe: Structure, mechanism, and acyl carrier protein binding. Ryan M. Van Wagoner and Jon Clardy. Structure, 2006, Volume 14, Number 9, 1425-1435.