Hampton 特种玻璃毛细管 Special Glass Capillaries

Hampton 特种玻璃毛细管 Special Glass Capillaries

APPLICATIONS

  • X-ray data collection
  • Liquid-liquid diffusion crystallization
  • Gel acupuncture crystallization

应用

  • X射线数据采集
  • 液-液扩散结晶
  • 凝胶针刺结晶

FEATURES  特征

  • Thin walled – 10 micron
  • Special Glass 10 (soda lime glass)
  • 薄壁-10微米
  • 特种玻璃10(苏打石灰玻璃、钠钙玻璃)

DESCRIPTION

Crystal Clear Special Glass 10 (soda lime glass) capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Glass capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/-5 mm. Glass capillaries are available in a wide range of outside diameters from 0.1 mm to 2.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials.

In determining what glass or quartz capillary is right for you, please refer to the “Linear Absorption Coefficient µ cm-1” table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection.

For 0.1 mm to 2.0 mm capillaries the open end capillary tube base size is 3.0 +/- 0.15 mm OD x 0.2 +/- 0.10 mm Wall thickness.

Special Glass 10 has a Linear Absorption Coefficient of 126.0 µ cm-1 for µ CuK Radiation (Wavelength for Copper radiation is 1.5418 Angstrom) and 14.7 µ cm-1 MoK Radiation (Wavelength for Molybdenum radiation is 0.7107 Angstrom) and a softening temperature of 815 degrees Celsius.

描述

水晶透明特种玻璃10(苏打石灰玻璃)毛细血管是极端薄壁(约10微米壁厚)。毛细管的长度有一个明确的直径,一端具有漏斗形状,另一端封闭。玻璃毛细血管壁厚0.01mm,总长度80 mm+-5mm。玻璃毛细血管的外径范围很广,从0.1毫米到2.0毫米不等。它们被设计用来安装、保存和存储小分子和生物大分子晶体,以便收集x射线数据。毛细血管也可用于晶体密度测量和晶体生长实验。毛细血管可以用蜡、环氧树脂或其他密封材料紧密密封以抵御水分和气体。

在决定玻璃或石英毛细管是否适合你时,请参考“线性吸收系数cm”。-1”桌子。本表显示了在x射线数据采集过程中被毛细管吸收的辐射量。

对于0.1~2.0mm毛细血管,管壁厚度为3.0+/-0.15mm×0.2+/-0.10 mm。

特种玻璃10对Cuk辐射的线性吸收系数为126.0 cm~1(铜辐射的波长为1.5418 Angstrom)和14.7cm~(-1)Mok辐射(钼辐射的波长为0.7107 Angstrom),软化温度为815℃。

直径测量距离闭合端约40毫米。公差如下。

The Diameter is measured about 40 mm from the closed end. The tolerances are as follows.

0.1 mm -0.075 / +0.075 mm
0.2 mm -0.050 / +0.050 mm
0.3 mm -0.050 / +0.100 mm
0.4 mm -0.100 / +0.100 mm
0.5 mm -0.100 / +0.100 mm
0.6 mm -0.100 / +0.100 mm
0.7 mm -0.150 / +0.150 mm
0.8 mm -0.150 / +0.150 mm
0.9 mm -0.150 / +0.150 mm
1.0 mm -0.150 / +0.250 mm
1.5 mm -0.250 / +0.250 mm
2.0 mm -0.250 / +0.250 mm

0.1mm-0.075/+0.075毫米
0.2mm-0.050/+0.050毫米
0.3mm-0.050/+0.100毫米
0.4mm-0.100/+0.100毫米
0.5mm-0.100/+0.100毫米
0.6mm-0.100/+0.100毫米
0.7mm-0.150/+0.150毫米
0.8mm-0.150/+0.150毫米
0.9mm-0.150/+0.150毫米
1.0mm-0.150/+0.250毫米
1.5mm-0.250/+0.250毫米
2.0mm-0.250/+0.250毫米

Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested.

毛细血管只在大气压(760 mmHg(Torr),29.92 inHg,14.696 psi)下进行测试。在其他压力下使用还没有经过测试。

HR6-152 Special Glass 10 Capillary 0.1 mm

CAT NO NAME DESCRIPTION
HR6-152 Special Glass 10 Capillary Size: 0.1 mm – 25 pack
HR6-154 Special Glass 10 Capillary Size: 0.2 mm – 25 pack
HR6-156 Special Glass 10 Capillary Size: 0.3 mm – 25 pack
HR6-158 Special Glass 10 Capillary Size: 0.4 mm – 25 pack
HR6-160 Special Glass 10 Capillary Size: 0.5 mm – 25 pack
HR6-162 Special Glass 10 Capillary Size: 0.6 mm – 25 pack
HR6-164 Special Glass 10 Capillary Size: 0.7 mm – 25 pack
HR6-166 Special Glass 10 Capillary Size: 0.8 mm – 25 pack
HR6-168 Special Glass 10 Capillary Size: 0.9 mm – 25 pack
HR6-170 Special Glass 10 Capillary Size: 1.0 mm – 25 pack
HR6-172 Special Glass 10 Capillary Size: 1.5 mm – 25 pack
HR6-174 Special Glass 10 Capillary Size: 2.0 mm – 25 pack

RELATED ITEM(S)
Capillary Cutting Stone™
Duco Cement
Beeswax
Wax Pen
Four Color Mounting Clay
Red Sticky Wax
Adjustable Crystal Mount
Brass Specimen Pin