Hampton Tungsten Carbide Scribe & Glass Cutter with Replaceable Tips

Hampton Tungsten Carbide Scribe & Glass Cutter with Replaceable Tips

碳化钨刀头&可更换刀尖的玻璃切割机

APPLICATIONS

  • Useful for scribing, cutting and removal of the upper coverglass that seals the LCP Sandwich Set.

FEATURES

  • Machined, lightweight aluminum handle
  • Replaceable tungsten carbide scribe tip
  • Diamond knurling for comfortable and sure grip
  • Pocket clip
  • Size: 8 mm diameter, 130 mm length
  • Reversible tip protects tip and user

DESCRIPTION

Tungsten Carbide scribe and glass cutter with replaceable tungsten carbide tip. Tungsten Carbide Tip can be removed and inverted to protect tip and user. Knurled aluminum alloy body and pocket clip. Overall length 130 mm. Useful for cutting and removal of the upper coverglass that seals the HR3-151 LCP Sandwich Set.

Tungsten carbide scribe tips are not threaded and are held in place with a threaded tip chuck. To remove tip, turn the tip chuck counterclockwise one turn (without completely removing the chuck) while holding the aluminum handle stationary, and pull the tip from the chuck and handle. To install a new tip, slide the new tip into the chuck and handle and tighten the tip chuck clockwise to secure the new tip into the handle. Loosen tip chuck, remove tip, reserve and install with the tip inverted to protect user and the tip when not in use.

Tungsten Carbide Scribe is supplied with one tip installed. Replacement tips sold separately. Tungsten Carbide Scribe Tip is a set of 3 replacement tips designed for the Tungsten Carbide Scribe HR4-702. Tungsten carbide Tip in steel shank to strengthen and protect carbide from damage. Scribe Tip Diameter x Length: 3 mm X 32 mm.

See the JOVE video for more details about using the Tungsten Carbide glass cutter to open LCP Sandwich Set experiments:

HR4-702 Tungsten Carbide Scribe Each
HR4-703 Tungsten Carbide Scribe Tip Pack of 3 tips

应用

  • 适用于划线,切割和拆卸上盖板,密封LCP三明治套。

特征

  • 机加工的,轻铝手柄
  • 可更换碳化钨针尖
  • 钻石滚花舒适可靠的抓地力
  • 袖珍夹
  • 尺寸:直径8毫米,长度130毫米
  • 可逆提示保护提示和用户

描述

碳化钨切割机和可更换碳化钨针尖的玻璃切割机。碳化钨针尖可以拆卸和倒置,以保护针尖和使用者。滚花铝合金阀体和口袋夹。总长130毫米。用于切割和移除上盖板,密封HR3-151 LCP夹层套。

碳化钨刀尖不是螺纹的,而是用螺纹夹头固定在适当的位置。若要移除夹头,请在保持铝制手柄固定的同时逆时针旋转一次(不完全移除卡盘),并从卡盘和手柄上拉出夹头。若要安装新的尖端,请将新的尖端滑动到卡盘中,并按顺时针方向拧紧夹头卡盘,以将新的尖端固定到手柄中。松开刀尖卡盘,拆下针尖,保留并安装倒装,以保护使用者和未使用时的针尖。

碳化钨Scribe是提供与一个尖端安装。更换提示单独出售。碳化钨刀尖是为碳化钨Scribe HR4-702设计的一套3种替代尖端。钢柄碳化钨针尖强化和防止碳化物损坏。划线头直径x长度:3毫米x 32毫米。

RELATED ITEM(S)

REFERENCES

1. Li, D., Boland, C., Walsh, K., Caffrey, M. Use of a Robot for High-throughput Crystallization of Membrane Proteins in Lipidic Mesophases. J. Vis. Exp. (67), e4000, DOI: 10.3791/4000 (2012).

2. Cherezov, V., and M. Caffrey. (2003) Nano-volume plates with excellent optical properties for fast, inexpensive crystallization screening of membrane proteins. J. Appl. Cryst. 36: 1372-1377.

3. Cherezov, V., Peddi, A., Muthusubramaniam, L., Zheng, Y.F., and M. Caffrey. (2004) A robotic system for crystallizing membrane and soluble proteins in lipidic mesophases. Acta Crystallogr. D Biol. Crystallogr. 60: 1795-1807.

4. Caffrey, M., Li, D., & Dukkipati, A. Membrane protein structure determination using crystallography and lipidic mesophases – recent advances and successes. Biochemistry. DOI: 10.1021/bj300010w, 2012.