Hampton蛋白结晶工具及耗材

Hampton蛋白结晶工具及耗材

Hampton蛋白质结晶捞针(结晶环)18 mm Mounted CryoLoop™ – 20 micron

HR4-974 18 mm Mounted CryoLoop 0.7 - 1.0 mm

HR4-974

Mounted CryoLoop™ – 20 micron

APPLICATIONS

  • Cryocrystallography

HR4-965 Mounted CryoLoop 0.7 - 1.0 mm

HR4-965

Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

HR4-994 Mounted CryoLoop 0.025 - 0.05 mm

CAT NO NAME DESCRIPTION
HR4-994 Mounted CryoLoop – 10 micron 0.025-0.05 mm – 25 pack
HR4-995 Mounted CryoLoop – 10 micron 0.05 – 0.1 mm – 25 pack
HR4-997 Mounted CryoLoop – 10 micron 0.1 – 0.2 mm – 25 pack
HR4-999 Mounted CryoLoop – 10 micron 0.2 – 0.3 mm – 25 pack

Adjustable Mounted CryoLoop™ with EasySnap MicroTube

HR8-110 Adjustable Mounted CryoLoop 0.7 - 1.0 mm

Applications
Cryocrystallography
Features
Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description 
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.

Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.

CAT NO NAME DESCRIPTION
HR4-338 Adjustable Mounted CryoLoop 0.05 – 0.1 mm – 25 pack
HR5-900 Adjustable Mounted CryoLoop Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)
HR4-336 Adjustable Mounted CryoLoop 0.025 – 0.05 mm – 25 pack
HR8-102 Adjustable Mounted CryoLoop 0.1 – 0.2 mm – 25 pack
HR8-072 Adjustable Mounted CryoLoop 0.2 – 0.3 mm – 25 pack
HR8-104 Adjustable Mounted CryoLoop 0.3 – 0.4 mm – 25 pack
HR8-106 Adjustable Mounted CryoLoop 0.4 – 0.5 mm – 25 pack
HR8-108 Adjustable Mounted CryoLoop 0.5 – 0.7 mm – 25 pack
HR8-110 Adjustable Mounted CryoLoop 0.7 – 1.0 mm – 25 pack

Hampton蛋白结晶小瓶和结晶帽CrystalCap™

CrystalCap™ ALS

Applications
Cryocrystallography
Features
ALS style crystal mount for cryocrystallography
CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
Description 
The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.

ALS style sample mounters accept the CrystalCap ALS.

HR4-779    CrystalCap ALS     without Vial – 60 pack

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

CrystalCap

APPLICATIONS

  • Cryocrystallography

FEATURES

  • SSRL style sample mount for cryocrystallography
  • CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers
CAT NO NAME DESCRIPTION
HR4-733 CrystalCap with Vial – 60 pack
HR4-902 CrystalCap without Vial – 60 pack
HR4-904 CrystalCap Vial Vial only – 30 pack

CrystalCap & Vial

Hampton CrystalCap™ SPINE HT

Applications
Cryocrystallography

Features  
SPINE style sample mount for cryocrystallography
CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base

Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers

2D alphanumeric coding for sample tracking & management
Bar coded, color coded, alphanumeric, magnetic cap
Color coded CryoLoop size
Description
The CrystalCap SPINE HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SPINE style caps. The CrystalCap SPINE HT attaches to a magnetic CrystalCap SPINE Vial and magnetic goniometer base. The tip of the CrystalCap SPINE HT accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap SPINE Vial is a 1.8 ml cryo vial featuring two small vents and is compatible with the CrystalCap SPINE HT. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The CrystalCap SPINE Vial features chamfered edges for enhanced cap positioning as well as a magnetic alloy bottom for stability. The HR8-114 CrystalCap SPINE Vial does have a magnet on the bottom of the vial.

The hollowed out design of the CrystalCap SPINE HT is compatible with SPINE style grippers, auto mounters and sample handlers.

The CrystalCap SPINE HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-118 CrystalCap SPINE HT 0.025-0.05 mm CryoLoop, without Vial – 30 pack
HR8-120 CrystalCap SPINE HT 0.05-0.1 mm CryoLoop, without Vial – 30 pack
HR8-122 CrystalCap SPINE HT 0.1-0.2 mm CryoLoop, without Vial – 30 pack
HR8-124 CrystalCap SPINE HT 0.2-0.3 mm CryoLoop, without Vial – 30 pack
HR8-126 CrystalCap SPINE HT 0.3-0.4 mm CryoLoop, without Vial – 30 pack
HR8-128 CrystalCap SPINE HT 0.4-0.5 mm CryoLoop, without Vial – 30 pack
HR8-130 CrystalCap SPINE HT 0.5-0.7mm CryoLoop, without Vial – 30 pack
HR8-132 CrystalCap SPINE HT 0.7-1.0 mm CryoLoop, without Vial – 30 pack
HR8-112 CrystalCap SPINE HT Cap only – 30 pack
HR8-116 CrystalCap SPINE HT Cap/Vial Cap/Vial only – 30 pack
HR8-094 CrystalCap SPINE without 2D code/printing Cap only – 30 pack
HR8-114 CrystalCap SPINE Vial Vial only – 30 pack

CrystalCap™ ALS HT

Applications

Cryocrystallography

Features
ALS style crystal mount for cryocrystallography
CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Color coded CryoLoop size
Description
The CrystalCap ALS HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS HT attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS HT is compatible with ALS style grippers, auto mounters and sample handlers.

The CrystalCap ALS HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-200 CrystalCap ALS HT 0.025-0.05 mm CryoLoop – 30 pack
HR8-202 CrystalCap ALS HT 0.05-0.1 mm CryoLoop – 30 pack
HR8-204 CrystalCap ALS HT 0.1-0.2 mm CryoLoop – 30 pack
HR8-206 CrystalCap ALS HT 0.2-0.3 mm CryoLoop – 30 pack
HR8-208 CrystalCap ALS HT 0.3-0.4 mm CryoLoop – 30 pack

Hampton 石英毛细管 Quartz Capillaries

Applications

X-ray data collection
Liquid-liquid diffusion crystallization
Gel acupuncture crystallization

Features
Quartz
Thin walled – 10 micron

CAT NO NAME DESCRIPTION
HR6-128 Quartz Capillary Size: 0.1 mm – 25 pack
HR6-130 Quartz Capillary Size: 0.2 mm – 25 pack
HR6-132 Quartz Capillary Size: 0.3 mm – 25 pack
HR6-134 Quartz Capillary Size: 0.4 mm – 25 pack
HR6-136 Quartz Capillary Size: 0.5 mm – 25 pack
HR6-138 Quartz Capillary Size: 0.6 mm – 25 pack
HR6-140 Quartz Capillary Size: 0.7 mm – 25 pack
HR6-142 Quartz Capillary Size: 0.8 mm – 25 pack
HR6-144 Quartz Capillary Size: 0.9 mm – 25 pack
HR6-146 Quartz Capillary Size: 1.0 mm – 25 pack
HR6-148 Quartz Capillary Size: 1.5 mm – 25 pack
HR6-150 Quartz Capillary Size: 2.0 mm – 25 pack
HR6-151 Quartz Capillary Size: 2.5 mm – 15 pack
HR6-175 Quartz Capillary Size: 3.0 mm – 15 pack
HR6-177 Quartz Capillary Size: 4.0 mm – 5 pack
HR6-179 Quartz Capillary Size: 5.0 mm – 5 pack
低温泡沫杜瓦瓶 Spearlab Cryogenic Foam Dewars
Spearlab Dewars
HR4-662 Cryogenic Foam Dewar (500 ml) – Small  500ml规格
HR4-675 – Spearlab Cryogenic Foam Dewar (2 liter)  2L规格

Applications 应用

Cryocrystallography 蛋白结晶学

Hampton 结晶板封口膜ClearSeal Film™ and Applicator

Applications 应用

Sealing film used to seal sitting drop crystallization experiments  使用密封膜来密封座滴结晶实验

Features  特征
1.High optical clarity, low auto-fluorescence
2.Easy to handle film; easy to remove liner
3.Pressure sensitive adhesive
4.For best results use specially designed applicator
5.UV transmissable, compatible with UV imaging systems
6.Low birefringence
7.Certified DNase-, RNase-, and nucleic-acid-free
8.Silicone adhesive is non-tacky until pressed against the sealing surface with the applicator
9.Chemically inert; no extractable except at extreme pH
10.Excellent chemical resistance (e.g. DMSO, Methanol, Acetonitrile)
11.Heat and cold resistant, recommended for temperatures from -70°C and 110°C

特征
高光学透明度、低自体荧光
膜易于处理 ;易拆卸衬垫
压力敏感粘合剂
为了获得佳效果 , 请使用专门设计的涂抹器
传染性紫外、紫外成像系统兼容
低双折射
认证 DNase – , RNase – , 和核酸的游离
硅酮粘合剂是无粘性的 , 直到压在密封表面与涂抹器
化学惰性的 ;除了极端 pH 不能提取优异的耐化学性 (如。DMSO 、甲醇、乙腈)
耐热耐寒 , 温度从 – 70 ° C 至 110 ° C

ClearSeal Film Before and After

Description
ClearSeal Film fits all SBS format 96 well plates. Minimal evaporation, minimal cross-well contamination, easy to handle, and optically clear. Single coated, 2 mil (0.05 mm), optically clear polyolefin film with pressure-sensitive silicone-based adhesive. Supplied as a 141 mm x 78 mm film with white polyester release liner (backing). Actual seal area after end tabs removed is 120 x 78 mm Seals well to polypropylene, polystyrene, and polycarbonate plates. Compatible with aqueous and organic solvents. Suitable for use between -70 and 110°C. For best seal, the plate must be sealed with the Film Sealing Paddle HR4-513. ClearSeal Film has a limited shelf life. Must be used before expiration date printed on box. Each pack of film (HR4-521) includes one free Film Sealing Paddle (available separately as HR4-413).

HR4-413 Film Sealing Paddle, 3 7/8″ x 2 15/16″, polyethylene, white. 5 paddles per pack. An alternative to the plate roller or brayer for pressing films to assure a secure uniform seal around all wells on 96-well, 384-well, and 1536-well plates. These paddles are especially recommended for sealing films on raised-rim plates because they fit within the rim of the plate.

Store ClearSeal Filmm at 20°C +/- 10 degrees at 50% RH +/- 10%.

Hampton 石蜡和硅润滑油Paraffin & Silicon Oil

Applications  应用
Microbatch crystallization    microbatch 结晶
Features  特征
Under oil crystallization 在油中结晶
Protect the sample from oxidation  保护样品免于氧化
Screen different temperatures without condensation   屏幕不同温度下不凝结
Description   描述 
Oils used for microbatch and modified microbatch crystallization under oil.

使用的油和改性 microbatch microbatch 结晶油。

Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.

Al 是机油的 50 ∶ 50 (体积 ∶ 体积) 混合物的石蜡油和硅油。Al 的石油是其发明者的名字命名 , Allan D ‘Arcy) 。

Silicon Oil

Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C

Silicon Oil 
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m

CryoTong™ – Long
ApplicationsCrystal transfer under cryo temperature
FeaturesArtery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.

Vial Clamp™ – Straight
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.
HR4-670 Vial Clamp - Straight
HR4-670
CrystalWand™ Magnetic
ApplicationsCrystalCap Magnetic & CrystalCap Copper Magnetic handling toolDescription
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.HR4-729 CrystalWand Magnetic, Straight HR4-315 CrystalWand Magnetic, 45° (McMiken Tool)

图片

图片

图片
Vial Clamp™ – Curved
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.HR4-671 Vial Clamp – Curved 45°/135°HR4-672 Vial Clamp – Curved 110°/70°图片

CrystalCap™ Holder
pplicationsCrystalCap support inside stainless steel dewars
FeaturesAdjustable heightSupports up to 8 CrystalCaps15 ml vial position for liquid propane500 and 1,000 ml versionsDescription
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.HR4-707 CrystalCap Holder – 500 ml
HR4-706  Replacement Height Adjustment Tool
Cap Container (empty)
HR8-016 Cap Container Opened
HR8-016

Applications

Holds 30 CrystalCap caps for storage or transport
Features
Black polypropylene box with overlap snap closure
Holds 30 caps with or without Mounted CryoLoops™
Description 
Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.

Hampton 水晶透明密封带Crystal Clear Sealing Tape

3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)