Hampton HR3-125 3孔坐滴结晶板 3 Well Midi UVP

Hampton HR3-125 3孔坐滴结晶板 3 Well Midi UVP

APPLICATIONS

  • Sitting drop crystallization

FEATURES

  • Lens effect drop wells for enhanced optics
  • Drop volume: 50 nl to 5 µl
  • Micro-numbering alongside drop volumes
  • Reservoir volume: 20 to 40 µl
  • ANSI/SLAS 1-2004 Standard
  • Drop well allows easier crystal harvesting
  • Three drop wells per reservoir
  • Midi profile for easier storage
  • UV compatible (UVP)

DESCRIPTION

The SWISSCI 3 Lens Crystallization Plate is an ideal product for protein crystallization presented in a 96-well plate format.

The plate was developed in collaboration with very experienced protein crystallographers. It is the result of many years of experience in successful robotic high-throughput crystallization and combines many of the necessary features not earlier available to the crystallographer.

The SWISSCI 3 Lens crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and mircoliter optimization alike. Made from optically superior polymer (UVP) and with a new design of the wells, the plate allows easy crystal viewing and retrieval.

The Advantages of the 3 Lens Crystallization Plate Easy crystal retrieval Raised wide wells make the crystal mounting especially easy.

Easy viewing The wells are a wide conical shape and have a lens effect for perfect illumination. The micro-numbering ensures you will never get lost again (visible by microscope). The optically superior polymer is UV transmissible and may be used to differentiate between salt and protein crystals.

Better sealing Wide partition walls between the wells give plenty of area for good sealing with tape. No central bending occurs in this very robust structure. Excellent long term storage – no sample evaporation.

Wide range of volumes Typical volumes are 20-40 µl of reservoir and 50 nl-5 µl drop size. The 288 optical wells offer three times the number of experimental constructions.

ANSI/SLAS 1-2004 Standard The plates are designed to the 96-well ANSI/SLAS 1-2004 standards for all common holders and external numbering (A-H, 1-12)with corner location make the plate easy to use in a robotic sampler. The 3 Lens plate is suitable for centrifugation. The unique 3 drop protein crystallization plate offers a new way of sitting-drop crystallography. The 288 wells are optically perfect designed to observe crystals under a microscope.

3 Lens plate features Easy to fill 96-lens structure – typically 30 microlitres per buffer lens. Standard ANSI/SLAS 1-2004 form for automation. Optically perfect wells with lens effect for a better view with microscope. Microscopic identifier within wells, simplifying the orientation under the microscope. Maximum volume of the buffer reservoir is 40 microlitres. Grown crystals are easy to identify and to remove from lens due to a low-binding polymer. Plate with 3 lenses for each sample, better growing security with triplicates or the ability to use lens two and lens three as mixing stations. Lenses fill without micro-droplets jumping out due to static effects. Wells can be individually sealed with a perfectly flat upper surface – there is a large land area designed to ensure integrity of each lens section. The profile allows for easier storage. Low volume buffer well enables savings on reagents. Triplicates allow for 288 constructs per plate.

应用

  • 坐滴结晶

特征

  • 用于增强光学的透镜效应下降井
  • 下降量:50毫升至5升
  • 微号
  • 库容:20至40升
  • ANSI/SLAS 1-2004标准
  • 滴井使晶体采集更容易。
  • 每个油藏三口滴井
  • MIDI配置文件以便于存储
  • 紫外兼容(UVP)

描述

SWISSCI 3透镜结晶板是一种理想的96孔平板形式的蛋白质结晶产品.

这个平板是与经验丰富的蛋白质晶体学家合作开发的。这是多年来在成功的机器人高通量结晶的经验的结果,并结合了许多必要的特点,不是早期可用的结晶学家。

SWISSCI 3透镜晶化板提供了独特的性能,使其既适合纳米晶的筛选,也适用于镜像仪的优化。由光学优越的聚合物(UVP)和一个新的设计井,板允许易于观察和取回晶体。

三透镜晶化板的优点 易于晶体检索凸起的宽井使晶体安装特别容易。

容易观看这些井是一个宽的圆锥形状,并有一个镜头的效果,以完美的照明。微观编号确保你再也不会迷路(显微镜下可以看到)。该光学优良聚合物具有紫外可透过性,可用于区分盐晶体和蛋白质晶体。

更好的密封井间隔墙很宽,有足够的面积,可以用胶带进行良好的密封。在这种非常坚固的结构中没有发生中心弯曲。优良的长期储存-没有样品蒸发。

广泛的卷典型的储集量为20~40μl,50 nl~5μl滴度.288口光学井是实验结构的三倍。

ANSI/SLAS 1-2004标准这些板是按照96井ANSI/SLAS 1-2004标准设计的,适用于所有常见的保持架和外部编号(A-H,1-12),具有角位位置,使板易于在机器人采样器中使用。三透镜板适用于离心。独特的三滴蛋白质结晶板提供了一种新的静坐结晶学方法.这288口井在光学上非常完美,可以在显微镜下观察晶体。

3透镜板特征易于填充96-镜头结构-通常30微升每缓冲镜头。标准ANSI/SLAS1-2004自动化表格。光学完美井与透镜效应,以更好地观察显微镜。井内的显微识别,简化了显微镜下的定位。缓冲储油层的最大容积为40微升。由于低结合聚合物,生长的晶体易于识别和从透镜中移除.每个样品有3个镜头的平板,更好的安全增长与三倍或使用镜头2和镜头三作为混合站的能力。镜片填充,没有微液滴跳出,因为静态的影响。井可以单独密封与一个完美的平面上表面-有一个大的土地面积设计,以确保每个镜头部分的完整性。配置文件允许更容易地存储。低容量缓冲井可节省试剂。三层允许每板288个构造。

HR3-123 Swissci 3 Well Midi Crystallization Plate in UVP (10) 10 plate case
HR3-125 Swissci 3 Well Midi Crystallization Plate in UVP (40) 40 plate case

RELATED ITEM(S)