标签归档：Hampton代理

Hampton 96孔蛋白结晶板Crystallization Plate (Swissci)

发表于由

Hampton 96孔蛋白结晶板Crystallization Plate (Swissci)

Crystallization Plates, Hardware & Accessories | 96 Well Crystallization Plates

Images

MRC Under Oil 96 Well

Images

MRC 2 Well UVP

Images

MRC 2 Well UVXPO
3 Well Midi Crystallization Plate

Images

3 Well Low Profile Crystallization Plate
LCP Lipidic Cubic Phase Screening
Diaplate

Hampton 96 孔蛋白结晶板Crystallization Plate (Swissci)

Diaplate
96 well 3.2 µl capacity dialysis plate

CrystalEX (Corning)
Sitting drop crystallization

CrystalEX Second Generation (Corning)
Sitting drop crystallization

CrystalQuick 96 Well Sitting Drop Plate (Greiner)
Sitting drop crystallization

Intelli-Plate 96 (Art Robbins Instruments)
Sitting drop crystallization

MRC 2 Well Crystallization Plate (Swissci) UVXPO
Sitting drop crystallization UVXPO

MRC 2 Well Crystallization Plate (Swissci) UVP
Sitting drop crystallization UVP

3 Well Crystallization Plate (Swissci)
Sitting drop crystallization

FRAP Sandwich Set
FRAP Sandwich Set

LCP Sandwich Set
Crystallization screening of membrane proteins in lipidic mesophase as well as bicelle method and batch method

LCP Lipidic Cubic Phase Screening plate (Swissci)
Lipidic cubic phase crystallization

MRC Under Oil 96 Well Crystallization Plate (Swissci)
Microbatch crystallization

Imp@ct Plate without reservoir (Greiner)
Microbatch crystallization

MASTERBLOCK® 96 Deep Well Plate (Greiner)
Reagent storage

Microplate Lid
Cover for 96 well HT Screens and Masterblock

Hampton 96 孔蛋白结晶板Crystallization Plate (Swissci)

3 Well Crystallization Plate (Swissci)
Sitting drop crystallization

CAT NO NAME DESCRIPTION
HR3-123 3 Well Midi Crystallization Plate (Swissci) 10 plate case
HR3-125 3 Well Midi Crystallization Plate (Swissci) 40 plate case
HR3-205 3 Well Low Profile Crystallization Plate (Swissci) 10 plate case
HR3-206 3 Well Low Profile Crystallization Plate (Swissci) 40 plate case

MRC 2 Well Crystallization Plate (Swissci) UVP

Sitting drop crystallization UVP

CAT NO NAME DESCRIPTION
HR3-082 MRC 2 Well Crystallization Plate 10 plate case
HR3-083 MRC 2 Well Crystallization Plate 40 plate case

MRC 2 Well Crystallization Plate (Swissci) UVXPO
Sitting drop crystallization UVXPO

CAT NO NAME DESCRIPTION
HR3-106 MRC 2 Well Crystallization Plate in UVXPO 10 plate case
HR3-107 MRC 2 Well Crystallization Plate in UVXPO 40 plate case

MRC Under Oil 96 Well Crystallization Plate (Swissci)
Microbatch crystallization

Applications
Microbatch crystallization

Features
Easy crystal retrieval
Easy viewing
UV imaging compatible
Drop Volume 100 nanoliter to 4 microliter
Oil Volume 20 µl
SBS Standard
Ultra low binding polymer, no static

Description 
The MRC Under Oil 96 Well Crystallization Plate is designed for microbatch crystallization.

The plate was developed at the MRC Laboratory of Molecular Biology (Cambridge, United Kingdom) in collaboration with Dr. Jan Löwe and colleagues. It is a result of many years of experience in successful robotic high-throughput crystallization and combines many of the features not earlier available to the crystallographer.

The new MRC Under Oil 96 Well Crystallization Plate is designed for microbatch crystallization using paraffin, silicon oil, or a mixture of the two. Following the initial experiment, evaporation of the drop through the oil allows for second crystallization stage, enabling further crystal growth as a consequence of concentration. This is different from other experiments in that the conditions are then extreme in nature and permit new conditions to arise.

The new MRC Under Oil 96 Well Crystallization Plate offers unique properties that make it ideal for both nanoliter crystallization screening and microliter optimization alike. Made from an optically superior polymer and with a new design of the wells, the plate allows easy crystal viewing and retrieval.

The advantages of the new MRC Under Oil 96 Well Crystallization Plate.

Easy Crystal Retrieval
Raised wide wells make the crystal mounting especially easy.

Easy Viewing
The wells are wide conical and have a polished surface on both sides important for perfect illumination. The micro numbering ensures that you will never get lost again (visible by microscope). The optically superior polymer is even UV transmissible and may be used to differentiate between salt and crystals.

Better Sealing
Wide partition walls between the wells give plenty of area for good sealing with tape for the initial experiments of microbatch. No central bending occurs in this very robust structure.

Recommended Volumes
Typical volumes validated for these plates are 20 µl of oil with a shot through sample delivery of 100 nanoliter to 4 microliter.

SBS Standard
The plates are designed to the 96 well SBS standard for all common holders and external numbering (A – H, 1 – 12) with corner location that make the plate easy to use in a robotic sampler. The plate can also be centrifuged for better results. The unique MRC Under Oil 96 well Crystallization plate offers a new way of microbatch crystallography. The 96 wells are optically perfect, designed to observe crystals under a microscope.

Unique Polymer
The proprietary polymer is optically perfect – ultra low binding and guaranteed to have central drop location in the well. There are no static effects and thus micro-droplet jumping is avoided.

CAT NO NAME DESCRIPTION
HR3-102 MRC Under Oil Crystallization Plate 10 plate case
HR3-104 MRC Under Oil Crystallization Plate 40 plate case

Universal V1-Puck (Uni-Puck) 使用说明

发表于由

Universal V1-Puck (Uni-Puck)

The Universal V1-Puck (Unipuck) is a sample pin storage and shipping container compatible with many automated sample mounting systems. The V1-puck holds 16 MiTeGen sample bases/pins. It consists of two parts shown in the image: 1) the sample enclosure (left) and 2) the sample base piece (right).

Each part of the V1-puck has a unique serial number for identification. Custom serial numbers are available if requested at time of order.

Universal V1-Puck (Unipuck) 是一种样品针存储和运输容器，与许多自动样品安装系统兼容。 V1-puck 可容纳 16 个 MiTeGen 样品底座/引脚。 它由图像中显示的两部分组成：1) 样品外壳（左）和 2）样品底座（右）。

V1-puck 的每个部件都有一个唯一的序列号用于识别。 如果在订购时要求，可提供自定义序列号。

Product Information  其他相关产品：

The tools for handling Universal V1-pucks are available individually or in our convenient Uni-puck Starter Kits.  Looking for a set of pucks, or outfitting a facility? You can see our bundle options available here: Bulk pricing options

  • Uni-Puck Multi Color Puck Option

    Get your Uni-pucks set in a series of unique colors. Help identify which puck you are working with. Available…

  • Universal Puck (Uni-Puck) Starter Kits

    To get you up–and–running to the beamline All the components you
    The Universal Puck Project

    A collaboration to develop the uni-puck, a new standard sample pin storage and shipping container.

    The uni-puck has been designed to be compatible with all robotic mounting systems currently in use at synchrotrons in the United States and many systems used abroad, requiring minimal changes to the robotic hardware of each system.

    Introduction

    The availability of robotic sample mounting systems continues to increase at synchrotron sources. (See smb.slac.stanford.edu/robosyncfor a list of available devices). Although the majority of these systems are compatible with Hampton-style magnetic cryo-pins, many types of containers are used for sample pin transportation and storage.

    Currently at synchrotron stations in the United States there are three main sample storage containers used: the ALS puck, the SSRL cassette, and the MSC magazine. The costs to purchase these containers and associated cryo-tools and the effort required to master their use has become a significant impediment to groups seeking to take advantage of more than one of these facilities.

    In an effort to minimize this burden, a collaboration was formed between the ALS, APS SBC-CAT, and SSRL staff. This group first proposed construction of a sorting system that would transfer sample pins between the most commonly used containers. However, it was observed that it could be possible to develop a sample storage container that would be compatible with all the sample mounting systems currently in use in the United States and many of the systems used abroad. Therefore, during a meeting at the 2004 ACA conference in Chicago the group decided to develop a universal container. We have received a lot of positive feedback in response to this effort. In particular, many have joined this collaboration including developers at the NSLS, APS, and CHESS and of commercial systems. These developers were asked to test the V1 uni-puck with their automated mounting systems and provide feedback on the design with the goal of cross compatibility and reliability. Through the collaborative efforts of all involved, a first version of the universal container, the V1 uni-puck has been completed. The V1 uni-puck was released for use at the ALS sector 5.0 beam lines and at the SSRL macromolecular crystallography beam lines with test users. Once groups have more experience using the V1 uni-puck, a second version (V2) may be released if necessary for improved performance.

    Design

    The outside form factor of the new universal container (uni-puck), resembles a standard ALS puck and for this reason will be compatible with the standard ALS cryo-tools and fit inside the ALS shipping dewar canister. Unlike the ALS puck, the pins are held inside the container using rare earth magnets which are more durable and more strongly and reliably hold the pins in place. Magnets are used in both the enclosure piece and base piece of the uni-puck. The uni-puck enclosure resembles an SSRL cassette as it contains ports that are nearly identical to those in an SSRL cassette. The uni-puck also provides the same clearance around the sides and bottom of the sample pin as an MSC magazine and the base piece shares a similar hole and slot for alignment inside the dispensing dewar.

    The universal puck consists of two parts: 1) the base piece and 2) the sample enclosure. Some key differences between the original ALS puck and universal puck are illustrated in the figures below.

    Both the universal puck enclosure and the base contain magnets and the assembly will hold together by magnetic force. Therefore, the side clips used on the ALS puck for this purpose are not necessary. However to enable the universal puck parts to fit interchangeably with ALS puck parts, clearance and mounting holes for these clips are provided. Interchangeability of the universal puck base and enclosure with the ALS puck parts enable rapid transfer of samples between these two containers.
    Compatibility of Specific Robotic Systems

    The ALS Robot (Berkeley Automated Mounting system)

    The uni-puck base piece is used inside the ALS dispensing dewar. This universal base will work in the ALS robotic systems interchangeably with the original ALS puck base. Because the sample pins are held in the same position, minimal hardware modifications or reprogramming is required.

    Because the outside form factor is similar, the V1 uni-puck is compatible with the standard ALS cryo-tools and shipping dewar canister. Additionally, the uni-puck base and enclosure pieces fit on the original ALS puck enabling rapid transfer between the two types of containers.

    Members of the ALS beam line development group are taking part in the universal puck project and will ensure compatibility and reliability with their automounter.

     

    The Stanford Automated Mounting System (SAM)

    The enclosure piece of the universal puck is used inside the SAM dispensing dewar. This piece contains magnetic cavities nearly identical to those in a SSRL cassette. To adapt the enclosure piece to the standard SAM setup an adaptor cassette has been developed. Four universal pucks may be inserted into one adaptor cassette. The adaptor is then inserted inside the robot dispensing dewar using the cassette transport handle (see below).

    The original SSRL cassettes will continue to work with the SAM system. Within the SSRL dispensing dewar the 3 cassette locations are each capable of interchangeably holding an SSRL cassette or an adaptor cassette containing 4 universal pucks.

    Once the universal container project and adaptor cassette development is complete, SSRL users will have the option to use cassettes or uni-pucks and the SAM system will be programmed to sort samples between these two options.
    APS SBC-CAT Automatic Mounting System

    Currently the SBC-CAT system works with MSC magazines. To work with the uni-puck, the system will be reprogrammed and a new dewar base plate will be developed that can accommodate both MSC magazines and universal puck bases. Users will then have the option to use either container.

    For added reliability when picking up a sample pin, the SBC-CAT robot grippers surround the bottom edge of the pin trapping it in place (rather than gripping the side of the pin and relying on friction to hold it). To accommodate this gripper, the uni-puck base provides additional clearance around the bottom and side of the pin base. This clearance is equal to that provided by the MSC magazine.

    Members of the APS SBC-CAT development group have been instrumental in the universal puck project and will ensure compatibility and reliability with their automounter.

    Commercially Available Systems

    This universal container concept has received positive feedback from the commercial manufacturers of robotic sample mounting systems (MSC, Bruker, and Mar). Moreover, MSC and Bruker representatives feel that it would be rather straight-forward for them to offer an alternative dewar base plate and programming to accommodate the proposed universal puck design.

    Fabrication of an alternative enclosure, that would contain traditional cryo-vials and mate with the universal puck base, will make it easy to transfer samples from vials into pucks and enable compatibility with even more robotic mounting systems.

Hampton 硅化玻璃盖玻片Siliconized Glass Coverslips (Greiner)

发表于由

Hampton 硅化玻璃盖玻片Siliconized Glass Coverslips (Greiner)

APPLICATIONS

  • Hanging or sitting drop vapor diffusion crystallization

FEATURES

  • High purity of glass
  • Siliconized, hydrophobic glass surface
  • 0.19-0.22mm glass thickness
  • 18 & 22 mm glass diameter
  • Circle glass cover slip
  • UV imaging compatible (>85% transmission)

DESCRIPTION

Siliconized glass coverslips allow a droplet to be suspended in a position which provides near optimal conditions for vapor diffusion with the surrounding reservoir solution. These siliconized glass cover slides provide a consistent, high quality finish for crystallization experiments. The hydrophobic surface produces a drop which “stands well” and does not flatten on the glass. The siliconized surface prevents the adhesion of crystals and precipitate onto the glass surface. Use vacuum grease or oil to seal cover slide to plate. Available in 18 or 22 mm diameter circles.

HR3-254 is Greiner Bio-One 503870 siliconized glass coverslip, round, 22mm diameter, 0.19-0.22mm thick. Non-sterile. 100 pieces per inner pack. Ten inner packs, totaling 1,000 pieces per packing unit. Fit VDX Plate.

HR3-255 is Greiner Bio-One 501870 siliconized glass coverslip, round, 18mm diameter, 0.19-0.22mm thick. Non-sterile. 100 pieces per inner pack. Ten inner packs, totaling 1,000 pieces per packing unit. Fits VDXm Plate and ComboPlate (Greiner 662050 and 662150).

应用

  • 悬吊或坐滴蒸汽扩散结晶

特征

  • 高纯玻璃
  • 硅化的、疏水性玻璃表面
  • 0.19-0.22mm玻璃厚度
  • 18&22毫米玻璃直径
  • 圆玻璃盖滑
  • 紫外成像兼容(透射率>85%)

描述

硅化玻璃圆柱体允许一个液滴悬浮在一个位置，这为周围的储油层溶液的蒸汽扩散提供了近乎最佳的条件。这些硅化玻璃覆盖幻灯片提供了一个一致的，高质量的完成结晶实验。疏水性表面会产生一滴“很好”的水滴，在玻璃上不会变平。硅化表面防止晶体粘附并沉淀到玻璃表面。用真空润滑脂或油密封盖子、滑动板。可分为18或22毫米直径圆。

HR3-254是Greiner Bio-one 503870硅化玻璃圆孔，直径22毫米，厚0.19-0.22mm.不不育。每个内包装100件。10个内包装，每包装1,000件。安装VDX板。

HR3-255是Greiner Bio-one 501870硅化玻璃圆孔，直径18毫米，厚0.19-0.22mm.不不育。每个内包装100件。10个内包装，每包装1,000件。适合VDXM板和组合板(Greiner 662050和662150)。

HR3-254 22mm Siliconized Circle Coverslips Pack (10×100 = 1,000)
HR3-255 18mm Siliconized Circle Coverslips Pack (10×100 = 1,000)

Hampton 结晶loop环底座 CrystalCap ALS

发表于由

Hampton 结晶loop环底座 CrystalCap ALS

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

DESCRIPTION

The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™.

CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.

ALS style sample mounters accept the CrystalCap ALS.

Compatible with the following Synchrotron Radiation Beamlines

North & South America
• The Advanced Light Source, Berkeley, California ALS 4.2.2, ALS 5.0.1, ALS 5.0.2, ALS 5.0.3, ALS 8.2.1, ALS 8.3.1, ALS 11.3.1, ALS 12.2.2, ALS 12.3.2, ALS 12.3.1-APX
• The Advanced Photon Source, Argonne, Illinois APS 14-BM-C BioCARS, APS 14-ID-B BioCARS, APS 17-ID IMCA-CAT, APS 19-BM, APS 19-ID, APS 22-BM SER-CAT, APS 22-ID SER-CAT, PS 23-BM-B GA/CA, APS 23-ID-B GA/CA, APS 23-ID-D GA/CA, APS 24-ID-C NE-CAT, APS 24-ID-E NE-CAT, APS 31-ID LR-CAT
• Center for Advanced Microstructures and Devices, Baton Rouge, Louisiana CAMD GCPCC
• Cornell High Energy, Synchrotron Source, Ithaca, New York CHESS A1, CHESS F1
• Canadian Light Source, Saskatchewan, Canada, CLS 08ID-1, CLS 08B1-1
• The Brazilian Synchrotron, Light Laboratory, Sao Paulo, Brazil LNLS D03B-MX1, LNLS W01B-MX2
• Stanford Synchrotron Radiation Laboratory, Menlo Park, California SSRL BL7-1, SSRL BL9-1, SSRL BL9-2, SSRL BL11-1, SSRL BL12-2, SSRL BL14-1

Europe
• Kurchatov Center for Synchrotron Radiation and Nanotechnology, Moscow, Russia KCSRNT K4.4
• Max-Lab, Lund University, Sweden MAX II I711, MAX II I911-2, MAX II I911-3
• MPG/DESY, Hamburg, Germany MPGDESY BW6
• SOLEIL, Saint-Aubin, France SOLEIL PROXIMA1, SOLEIL PROXIMA2

Asia & Australia
• Shanghai Synchrotron Radiation Facility, Shanghai, China SSRF BL17U1
• National Synchrotron Radiation Research Center, Taiwan NSRRC BL13B1, NSRRC BL13C1
• Pohang Accelerator Laboratory, Pohang, South Korea PAL 2D, PAL 5C, PAL 7A
• Photon Factory, Tsukuba, Japan PF BL-5A, PF BL-17A, PF AR-NW12A • Super Photon ring-8 GeV, Japan SPRING-8 BL12B2, SPRING-8 BL24XU, SPRING-8 BL26B1, SPRING-8 BL26B2, SPRING-8 BL32B2, SPRING-8 BL32XU, SPRING-8 BL38B1, SPRING-8 BL41XU, SPRING-8 BL44B2, SPRING-8 BL44XU

应用

  • 冰晶术

特征

  • AlS型结晶架
  • 结晶帽ALS磁性附着在结晶帽Vial磁力仪基座
  • 可与ALS风格的夹持器、自动装配器和示例处理程序兼容的自由锥形形状

描述

结晶帽ALS是一个磁性样品安装(也称为盖子，引脚或测角器底座)，为接受ALS型样品安装的晶晶系统设计。水晶帽ALS附着在磁性水晶帽的气门和磁测角仪的基座上。水晶帽的顶端接受安装的冷冻环™。

晶体帽ALS(HR4-779)是在没有小瓶(HR4-904).

水晶瓶盖是一个1.8毫升的冰瓶，有两个小通风口。将环形磁铁模压到瓶的开口端，以便当盖被放置在瓶中时，环磁铁在低温储存期间将盖保持在瓶上。HR4-904水晶帽瓶底部没有磁铁。

水晶帽ALS的无棱镜锥形形状与ALS风格的夹持器、自动装配器和样品处理程序兼容。

ALS风格的样品贴片机接受水晶帽ALS。

与下列同步辐射光束线兼容

北美和南美洲
·高级光源，加州伯克利，ALS 4.2.2，ALS 5.0.1，ALS 5.0.2，ALS 5.0.3，ALS 8.2.1，ALS 8.3.1，ALS 11.3.1，ALS 12.2.2，ALS 12.3.2，ALS 12.3.1-APX
*高级光子源，阿贡，伊利诺斯州APS 14-BM-C BioCARS，APS 14-ID-B BioCARS，APS 17-ID IMCA-CAT，APS 19-BM，APS 19-ID，APS 22-BM SER-CAT，APS 22-ID SER-CAT，PS 23-BM-B GA/CA，APS 23-ID-B GA/CA，APS 23-ID-D GA/CA，APS 24-ID-C NE-CAT，APS 24 ID-E NE-CAT，APS 31-ID LR-CAT
·先进微结构和器件中心，巴吞鲁日，路易斯安那州CAMD GCPCC
·康奈尔高能，同步加速器源，伊萨卡，纽约国际象棋A1，国际象棋F1
加拿大光源，加拿大萨斯喀彻温省，CLS 08ID-1，CLS 08B1-1
*巴西同步加速器，光实验室，巴西圣保罗，LNLS D03B-MX1，LNLS W01B-MX2
·斯坦福同步辐射实验室，加州门罗公园，SSRL BL 7-1，SSRL BL 9-1，SSRL BL 9-2，SSRL BL 11-1，SSRL BL 12-2，SSRL BL 14-1

欧洲
·库尔恰托夫同步辐射和纳米技术中心，俄罗斯莫斯科KCSRNT K4.4
·瑞典隆德大学实验室，Max II I 711，Max II I 911-2，Max II I 911-3
*MPG/DESY，德国汉堡，MPGDESY BW6
太阳、圣奥宾、法国太阳PROXIMA 1、太阳PROXIMA 2

亚洲和澳大利亚
·上海同步辐射装置，中国上海SSRF BL17U1
·国家同步辐射研究中心，台湾NSRRC BL13B1，NSRRC BL13C1
·波航加速器实验室，韩国POHANG，PAL 2D，PAL 5C，PAL 7A

HR4-779 CrystalCap ALS without Vial – 60 pack

RELATED ITEM(S)

Sample Containers:

A: SSRL cassette

 

B: ACTOR magazine

 

C: Cryo-vial basket or EMBL/ESRF cryo-vial basket

 

D: ALS puck

E: Uni-puck

F: miniSPINE puck

Sample Pin Bases:

A: Hampton magnetic

 

B: Hampton copper magnetic

 

C: ALS-style

 

C: ALS-style

 

D: Mitegen B3S

E: SPINE

F: miniSPINE

Hampton 结晶Loop环底座 CrystalCap

发表于由
Hampton 结晶Loop环底座 CrystalCap
CrystalCap™ SPINE HT
Images

CrystalCap™ SPINE HT

APPLICATIONS

  • Cryocrystallography

FEATURES

  • SPINE style sample mount for cryocrystallography
  • CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers
  • Compatible with automated sample handlers
  • 2D alphanumeric coding for sample tracking & management
  • Bar coded, color coded, alphanumeric, magnetic cap
  • Color coded CryoLoop size

CrystalCap™ SPINE HT
应用
低温晶体学
特征
用于冷冻晶体学的 SPINE 型样品架
CrystalCap SPINE HT 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座
镂空设计与 SPINE 型夹持器、自动贴片机和样品处理器兼容
与自动化样品处理器兼容
用于样本跟踪和管理的 2D 字母数字编码
条形码、颜色编码、字母数字、磁性帽
颜色编码的 CryoLoop 尺寸

CrystalCap™
Images
  • Cryocrystallography

FEATURES

  • SSRL style sample mount for cryocrystallography
  • CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers

低温晶体学
特征
用于低温晶体学的 SSRL 型样品架
CrystalCap 磁性连接到 CrystalCap 小瓶和磁性测角仪底座
圆锥形状，带有与 SSRL 型夹持器、自动贴片机和样品处理器兼容的壁架

CrystalCap™ ALS
Images

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

应用
低温晶体学
特征
用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状

CrystalCap™ ALS HT
Images

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
  • 2D alphanumeric coding for sample tracking & management
  • Color coded CryoLoop size

应用
低温晶体学
特征
用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS HT 磁性连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状
用于样本跟踪和管理的 2D 字母数字编码
颜色编码的 CryoLoop 尺寸

Cap Container empty

Sample Containers:

A: SSRL cassette

 

B: ACTOR magazine

 

C: Cryo-vial basket or EMBL/ESRF cryo-vial basket

 

D: ALS puck

E: Uni-puck

F: miniSPINE puck

Sample Pin Bases:

A: Hampton magnetic

 

B: Hampton copper magnetic

 

C: ALS-style

 

C: ALS-style

 

D: Mitegen B3S

E: SPINE

F: miniSPINE

Hampton 24孔蛋白结晶板分类及其应用

特色

发表于由

Hampton 24孔蛋白结晶板分类

上海金畔生物科技有限公司代理美国Hampton 品牌蛋白结晶产品，欢迎新老客户访问Hampton官网或者咨询我们获取更多相关产品信息。

Crystallization Plates, Hardware & Accessories > 24 Well Crystallization Plates

1.Cryschem M Plate (round reagent reservoir)

Cryschem M板(圆形试剂油藏)

Images

APPLICATIONS

  • Sitting drop crystallization
  • Heavy atom soaks
  • Seeding

FEATURES

  • Optically clear, concave sitting drop post
  • Cryschem M – Microplate footprint with round reagent reservoir
  • Smooth, flat top for easy seal
  • Each plate supplied with a cover

应用
坐滴结晶
重原子浸泡
播种
特征
光学透明的凹形坐滴柱
Cryschem M – 带有圆形试剂槽的微孔板足迹
光滑、平坦的顶部，便于密封
每块板都配有一个盖子

2.Cryschem S Plate (square reagent reservoir)

Cryschem S板(方试剂油藏)

Images

APPLICATIONS

  • Sitting drop crystallization
  • Heavy atom soaks
  • Seeding

FEATURES

  • Optically clear, concave sitting drop post
  • Cryschem S – Microplate footprint with square reagent reservoir (compatible with Formulatrix Formulator)
  • Smooth, flat top for easy seal
  • Each plate supplied with a cover

应用
坐滴结晶
重原子浸泡
播种
特征
光学透明的凹形坐滴柱
Cryschem S – 带有方形试剂槽的微孔板占地面积（与 Formulatrix Formulator 兼容）
光滑、平坦的顶部，便于密封
每块板都配有一个盖子

3.Cryschem Plate

Cryschem板

Images

APPLICATIONS

  • Sitting drop crystallization
  • Heavy atom soaks
  • Seeding

FEATURES

  • Optically clear, concave sitting drop post
  • Cryschem Plate – Larger footprint and round reagent reservoir
  • Smooth, flat top for easy seal
  • Each plate supplied with a cover

应用
坐滴结晶
重原子浸泡
播种
特征
光学透明的凹形坐滴柱
Cryschem 板 – 更大的占地面积和圆形试剂槽
光滑、平坦的顶部，便于密封
每块板都配有一个盖子

4.VDX Plate without sealant

无密封剂VDX板

Images

  • Hanging drop crystallization
  • Sitting drop crystallization with Micro-Bridges®
  • Dialysis crystallization with Dialysis Buttons™

FEATURES

  • 24 well plate with raised cover
  • Compatible with 22 mm diameter square and circle cover slides
  • Optically clear plastic
  • Extremely versatile and cost-effective crystallization platform
  • Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

悬滴结晶
使用 Micro-Bridges® 进行静滴结晶
使用 Dialysis Buttons™ 进行透析结晶
特征
24孔板带凸起盖板
兼容直径为 22 毫米的方形和圆形盖玻片
光学透明塑料
极其通用且具有成本效益的结晶平台
与 HR3-231 和 HR3-233 – 22 mm x 0.22 mm 硅化圆形盖玻片和 HR3-215 和 HR3-217 – 22 mm x 0.22 mm 硅化方形盖玻片一起使用时，与 UV 晶体成像兼容

5.VDX Plate with sealant

带密封剂的VDX板

Images

APPLICATIONS

  • Hanging drop crystallization
  • Sitting drop crystallization with Micro-Bridges®
  • Dialysis crystallization with Dialysis Buttons™

FEATURES

  • 24 well plate with raised cover
  • Sealant applied to 24 wells, ready to seal with cover slides
  • Compatible with 22 mm diameter square and circle cover slides
  • Optically clear plastic
  • Extremely versatile and cost-effective crystallization platform
  • Compatible with UV crystal imaging when used with HR3-231 and HR3-233 – 22 mm x 0.22 mm Siliconized circle cover slides and HR3-215 and HR3-217 – 22 mm x 0.22 mm Siliconized square cover slides

应用
悬滴结晶
使用 Micro-Bridges® 进行静滴结晶
使用 Dialysis Buttons™ 进行透析结晶
特征
24孔板带凸起盖板
密封剂应用于 24 个孔，准备用盖玻片密封
兼容直径为 22 毫米的方形和圆形盖玻片
光学透明塑料
极其通用且具有成本效益的结晶平台
与 HR3-231 和 HR3-233 – 22 mm x 0.22 mm 硅化圆形盖玻片和 HR3-215 和 HR3-217 – 22 mm x 0.22 mm 硅化方形盖玻片一起使用时，与 UV 晶体成像兼容

6.VDXm Plate without sealant

无密封剂VDXM板

Images

APPLICATIONS

  • Hanging drop crystallization

FEATURES

  • 24 well plate with raised cover
  • Sealant applied to 24 wells, ready to seal with cover slides
  • Compatible with 18 mm diameter circle cover slides
  • Optically clear plastic
  • 128 mm x 85 mm microplate footprint
  • Compatible with UV crystal imaging when used with HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides

应用
悬滴结晶
特征
24孔板带凸起盖板
兼容 18 毫米直径的圆形盖玻片
光学透明塑料
128 毫米 x 85 毫米微孔板占地面积
与 HR3-239 和 HR3-241 一起使用时与 UV 晶体成像兼容 – 18 mm x 0.22 mm 硅化圆形盖玻片

7.VDXm Plate with sealant

带密封剂的VDXM板

Images

APPLICATIONS

  • Hanging drop crystallization

FEATURES

  • 24 well plate with raised cover
  • Sealant applied to 24 wells, ready to seal with cover slides
  • Compatible with 18 mm diameter circle cover slides
  • Optically clear plastic
  • 128 mm x 85 mm microplate footprint
  • Compatible with UV crystal imaging when used with HR3-239 and HR3-241 – 18 mm x 0.22 mm Siliconized circle cover slides

应用
悬滴结晶
特征
24孔板带凸起盖板
密封剂应用于 24 个孔，准备用盖玻片密封
兼容 18 毫米直径的圆形盖玻片
光学透明塑料
128 毫米 x 85 毫米微孔板占地面积
与 HR3-239 和 HR3-241 一起使用时与 UV 晶体成像兼容 – 18 mm x 0.22 mm 硅化圆形盖玻片

8.Intelli-Plate 24-4 (Art Robbins Instruments)

智能板24-4(适用于Art Robbins Instruments系统)

Images

APPLICATIONS

  • Sitting drop crystallization

FEATURES

  • 4 drop wells per reservoir
  • Setup by hand or dispenser, such as the Crystal Gryphon
  • SBS microplate footprint
  • Ideal for optimization and larger volumes
  • Alphanumeric labeled drop wells visible under microscope
  • Plate material: Polystyrene

应用
坐滴结晶
特征
每个水库 4 口井
手动或分配器设置，例如 Crystal Gryphon
SBS 微孔板足迹
优化和更大体积的理想选择
显微镜下可见的字母数字标记滴孔
板材材质：聚苯乙烯

9.Greiner ComboPlate and CrystalBridge

Greiner组合板与结晶桥

Images

Hampton 粘土 橡皮泥 黏土 Four Color Mounting Clay

发表于由

Hampton 粘土 橡皮泥 黏土 Four Color Mounting Clay

Hampton Four Color Mounting Clay   四色贴装粘土

APPLICATIONS

  • Stabilizing the capillary on the goniometer head or brass specimen pin

FEATURES

  • Color code capillary mounts
  • Adhesive, malleable, non-hardening

DESCRIPTION

Adhesive, malleable, non-hardening clays have many uses in the crystallization lab. Useful for holding capillaries during crystal mounting as well as, stabilizing the capillary in the goniometer head. Useful for propping open the lids of crystallization plates. Great for color coding experiments, capillaries, and Linbro® crystallization plates. Supplied as four 4 ounce bars of clay, each bar is individually wrapped. This Van Aken Claytoon Hot Set offers the colors Magenta, Rose, Neon Orange, and Yellow (as pictured above).

应用

  • 稳定测角仪头或黄铜试样销上的毛细管

特征

  • 彩色码毛细管安装
  • 粘合剂，可锻铸的，不硬化的

描述

黏合剂、可锻铸的、不硬化的粘土在结晶实验室中有许多用途.用于在晶体安装过程中保持毛细血管，以及稳定测角仪头部的毛细血管。用于支持打开结晶板盖子。伟大的颜色编码实验，毛细血管，和林布罗结晶板。作为四条4盎司的粘土供应，每条是单独包装。这范艾肯克莱顿热身提供的颜色洋红，玫瑰，霓虹灯橙和黄色(如上图)。

HR4-326 Four Color Mounting Clay 黏土 橡皮泥 16 oz pack (4 oz each color)

Hampton蛋白结晶工具及耗材

特色

发表于由

Hampton蛋白结晶工具及耗材

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等，我们将竭诚为您服务，欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Hampton蛋白质结晶捞针（结晶环）18 mm Mounted CryoLoop™ – 20 micron

HR4-974 18 mm Mounted CryoLoop 0.7 - 1.0 mm

HR4-974

Mounted CryoLoop™ – 20 micron

APPLICATIONS

  • Cryocrystallography

HR4-965 Mounted CryoLoop 0.7 - 1.0 mm

HR4-965

Hampton 蛋白结晶loop环 Mounted CryoLoop 10 micron with EasySnap MicroTube

HR4-994 Mounted CryoLoop 0.025 - 0.05 mm

CAT NO NAME DESCRIPTION
HR4-994 Mounted CryoLoop – 10 micron 0.025-0.05 mm – 25 pack
HR4-995 Mounted CryoLoop – 10 micron 0.05 – 0.1 mm – 25 pack
HR4-997 Mounted CryoLoop – 10 micron 0.1 – 0.2 mm – 25 pack
HR4-999 Mounted CryoLoop – 10 micron 0.2 – 0.3 mm – 25 pack

Adjustable Mounted CryoLoop™ with EasySnap MicroTube

HR8-110 Adjustable Mounted CryoLoop 0.7 - 1.0 mm

Applications
Cryocrystallography
Features
Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop

Description 
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.

Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.

CAT NO NAME DESCRIPTION
HR4-338 Adjustable Mounted CryoLoop 0.05 – 0.1 mm – 25 pack
HR5-900 Adjustable Mounted CryoLoop Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)
HR4-336 Adjustable Mounted CryoLoop 0.025 – 0.05 mm – 25 pack
HR8-102 Adjustable Mounted CryoLoop 0.1 – 0.2 mm – 25 pack
HR8-072 Adjustable Mounted CryoLoop 0.2 – 0.3 mm – 25 pack
HR8-104 Adjustable Mounted CryoLoop 0.3 – 0.4 mm – 25 pack
HR8-106 Adjustable Mounted CryoLoop 0.4 – 0.5 mm – 25 pack
HR8-108 Adjustable Mounted CryoLoop 0.5 – 0.7 mm – 25 pack
HR8-110 Adjustable Mounted CryoLoop 0.7 – 1.0 mm – 25 pack

Hampton蛋白结晶小瓶和结晶瓶帽 CrystalCap™

CrystalCap™ ALS

Applications  应用
Cryocrystallography   低温晶体学
Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状

Description 
The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.

ALS style sample mounters accept the CrystalCap ALS.

HR4-779    CrystalCap ALS     without Vial – 60 pack

APPLICATIONS

  • Cryocrystallography

FEATURES

  • ALS style crystal mount for cryocrystallography
  • CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers

CrystalCap

APPLICATIONS

  • Cryocrystallography

FEATURES

  • SSRL style sample mount for cryocrystallography
  • CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
  • Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers
CAT NO NAME DESCRIPTION
HR4-733 CrystalCap with Vial – 60 pack
HR4-902 CrystalCap without Vial – 60 pack
HR4-904 CrystalCap Vial Vial only – 30 pack

CrystalCap & Vial

Hampton CrystalCap™ SPINE HT

Applications  应用
Cryocrystallography   低温晶体学

Features   特征
SPINE style sample mount for cryocrystallography
CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base

Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers

2D alphanumeric coding for sample tracking & management
Bar coded, color coded, alphanumeric, magnetic cap
Color coded CryoLoop size

用于低温晶体学的 SPINE 型样品架
CrystalCap SPINE HT 以磁性方式连接到 CrystalCap 样品瓶和磁性测角仪底座

镂空设计与 SPINE 型夹持器、自动贴片机和样品处理器兼容

用于样本跟踪和管理的 2D 字母数字编码
条形码、颜色编码、字母数字、磁性帽
颜色编码的 CryoLoop 尺寸

Description
The CrystalCap SPINE HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SPINE style caps. The CrystalCap SPINE HT attaches to a magnetic CrystalCap SPINE Vial and magnetic goniometer base. The tip of the CrystalCap SPINE HT accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap SPINE Vial is a 1.8 ml cryo vial featuring two small vents and is compatible with the CrystalCap SPINE HT. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The CrystalCap SPINE Vial features chamfered edges for enhanced cap positioning as well as a magnetic alloy bottom for stability. The HR8-114 CrystalCap SPINE Vial does have a magnet on the bottom of the vial.

The hollowed out design of the CrystalCap SPINE HT is compatible with SPINE style grippers, auto mounters and sample handlers.

The CrystalCap SPINE HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-118 CrystalCap SPINE HT 0.025-0.05 mm CryoLoop, without Vial – 30 pack
HR8-120 CrystalCap SPINE HT 0.05-0.1 mm CryoLoop, without Vial – 30 pack
HR8-122 CrystalCap SPINE HT 0.1-0.2 mm CryoLoop, without Vial – 30 pack
HR8-124 CrystalCap SPINE HT 0.2-0.3 mm CryoLoop, without Vial – 30 pack
HR8-126 CrystalCap SPINE HT 0.3-0.4 mm CryoLoop, without Vial – 30 pack
HR8-128 CrystalCap SPINE HT 0.4-0.5 mm CryoLoop, without Vial – 30 pack
HR8-130 CrystalCap SPINE HT 0.5-0.7mm CryoLoop, without Vial – 30 pack
HR8-132 CrystalCap SPINE HT 0.7-1.0 mm CryoLoop, without Vial – 30 pack
HR8-112 CrystalCap SPINE HT Cap only – 30 pack
HR8-116 CrystalCap SPINE HT Cap/Vial Cap/Vial only – 30 pack
HR8-094 CrystalCap SPINE without 2D code/printing Cap only – 30 pack
HR8-114 CrystalCap SPINE Vial Vial only – 30 pack

CrystalCap™ ALS HT

Applications  应用

Cryocrystallography  低温晶体学

Features  特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Color coded CryoLoop size

用于低温晶体学的 ALS 型晶体支架
CrystalCap ALS HT 磁性连接到 CrystalCap 样品瓶和磁性测角仪底座
与 ALS 型夹持器、自动贴片机和样品处理器兼容的无边缘圆锥形状
用于样本跟踪和管理的 2D 字母数字编码
颜色编码的 CryoLoop 尺寸


Description
The CrystalCap ALS HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS HT attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The ledge free conical shape of the CrystalCap ALS HT is compatible with ALS style grippers, auto mounters and sample handlers.

The CrystalCap ALS HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.

CAT NO NAME DESCRIPTION
HR8-200 CrystalCap ALS HT 0.025-0.05 mm CryoLoop – 30 pack
HR8-202 CrystalCap ALS HT 0.05-0.1 mm CryoLoop – 30 pack
HR8-204 CrystalCap ALS HT 0.1-0.2 mm CryoLoop – 30 pack
HR8-206 CrystalCap ALS HT 0.2-0.3 mm CryoLoop – 30 pack
HR8-208 CrystalCap ALS HT 0.3-0.4 mm CryoLoop – 30 pack

Hampton 石英毛细管 Quartz Capillaries

Applications  应用

X-ray data collection   X射线数据采集
Liquid-liquid diffusion crystallization  液-液扩散结晶
Gel acupuncture crystallization  凝胶针灸结晶

Features  特征
Quartz  石英
Thin walled – 10 micron  薄壁 – 10 微米

CAT NO NAME DESCRIPTION
HR6-128 Quartz Capillary Size: 0.1 mm – 25 pack
HR6-130 Quartz Capillary Size: 0.2 mm – 25 pack
HR6-132 Quartz Capillary Size: 0.3 mm – 25 pack
HR6-134 Quartz Capillary Size: 0.4 mm – 25 pack
HR6-136 Quartz Capillary Size: 0.5 mm – 25 pack
HR6-138 Quartz Capillary Size: 0.6 mm – 25 pack
HR6-140 Quartz Capillary Size: 0.7 mm – 25 pack
HR6-142 Quartz Capillary Size: 0.8 mm – 25 pack
HR6-144 Quartz Capillary Size: 0.9 mm – 25 pack
HR6-146 Quartz Capillary Size: 1.0 mm – 25 pack
HR6-148 Quartz Capillary Size: 1.5 mm – 25 pack
HR6-150 Quartz Capillary Size: 2.0 mm – 25 pack
HR6-151 Quartz Capillary Size: 2.5 mm – 15 pack
HR6-175 Quartz Capillary Size: 3.0 mm – 15 pack
HR6-177 Quartz Capillary Size: 4.0 mm – 5 pack
HR6-179 Quartz Capillary Size: 5.0 mm – 5 pack
低温泡沫杜瓦瓶 Spearlab Cryogenic Foam Dewars

Applications 应用

Cryocrystallography 蛋白结晶学

Spearlab Dewars
HR4-676 Cryogenic Foam Dewar (130 ml) – Mini each
HR4-662 Cryogenic Foam Dewar (500 ml) – Small each
HR4-673 Cryogenic Foam Dewar (800 ml) – Standard each
HR4-674 Cryogenic Foam Dewar (1400 ml) – Large each
HR4-675 Cryogenic Foam Dewar (2 liter) – Tall each

Hampton 结晶板封口膜 ClearSeal Film™ and Applicator

Applications 应用

Sealing film used to seal sitting drop crystallization experiments  使用密封膜来密封座滴板结晶实验

Features  特征
1.High optical clarity, low auto-fluorescence
2.Easy to handle film; easy to remove liner
3.Pressure sensitive adhesive
4.For best results use specially designed applicator
5.UV transmissable, compatible with UV imaging systems
6.Low birefringence
7.Certified DNase-, RNase-, and nucleic-acid-free
8.Silicone adhesive is non-tacky until pressed against the sealing surface with the applicator
9.Chemically inert; no extractable except at extreme pH
10.Excellent chemical resistance (e.g. DMSO, Methanol, Acetonitrile)
11.Heat and cold resistant, recommended for temperatures from -70°C and 110°C

特征
高光学透明度、低自体荧光
膜易于处理 ；易拆卸衬垫
压力敏感粘合剂
为了获得佳效果 ， 请使用专门设计的涂抹器
传染性紫外、紫外成像系统兼容
低双折射
认证 DNase – ， RNase – ， 和核酸的游离
硅酮粘合剂是无粘性的 ， 直到压在密封表面与涂抹器
化学惰性的 ；除了极端 pH 不能提取优异的耐化学性 (如。DMSO 、甲醇、乙腈)
耐热耐寒 ， 温度从 – 70 ° C 至 110 ° C

Crystal Clear Sealing Film

APPLICATIONS  应用

  • Sealing film used to seal sitting drop crystallization experiments

密封膜用于密封坐滴结晶实验

FEATURES   特征

  • Fits SBS format microplates
  • No special applicator required
  • Optically clear

适合 SBS 格式的微孔板
无需特殊涂抹器
光学透明

DESCRIPTION  描述

Crystal Clear Sealing Film is an optically transparent sealing film for SBS format 24, 48, 96 and 384 well plates. The 2 mil +/-10% (0.05 mm) thick, optically clear, non-fluorescing polyester film with 1.0 – 1.3 mil (0.025 mm) thick acrylic custom adhesive is designed for the convenient and secure sealing of crystallization plates. A split, optically opaque 2.0 mil +/-10% polyester backing with two end tabs assures a clean uniform adhesive layer and allows for easy, accurate positioning on the plate. Before use, peel off the opaque center protective polyester backing to reveal the optically clear sealing film. Film length: 5.625″ +/- 0.015 Film width: 3.125″ +/- 0.015 End tabs: 0.375″ +/- 0.015 Perforations: 0.415″ +/- 0.015 from edge of film Corner radius: 3/32″. Free of detectable levels of DNase-, RNase- and Human/Mouse DNA contamination (PCR Certified), non-sterile. Recommended temperatures from -40 to +120°C. Not recommended for UV imaging.

Crystal Clear Sealing Film 是一种光学透明密封膜，适用于 SBS 格式 24、48、96 和 384 孔板。 2 mil +/-10% (0.05 mm) 厚、光学透明、无荧光的聚酯薄膜和 1.0 – 1.3 mil (0.025 mm) 厚的丙烯酸定制粘合剂专为方便和安全地密封结晶板而设计。带有两个末端标签的分离、光学不透明的 2.0 mil +/-10% 聚酯背衬可确保清洁均匀的粘合剂层，并允许在板上轻松、准确地定位。使用前，撕下不透明的中央保护聚酯背衬，露出光学透明的密封膜。胶片长度：5.625″ +/- 0.015 胶片宽度：3.125″ +/- 0.015 端片：0.375″ +/- 0.015 穿孔：距胶片边缘 0.415″ +/- 0.015 角半径：3/32″。不可检测DNase-、RNase- 和人类/小鼠 DNA 污染（PCR 认证）的水平，非无菌。推荐温度为 -40 至 +120°C。不推荐用于紫外线成像。

Film Sealing Paddle  薄膜密封辅助板

APPLICATIONS  应用

  • Even and secure application of sealing films to crystallization plates   将密封膜均匀且安全地应用到结晶板上

FEATURES  特征

  • White, polyethyelene plastic
    • 5 paddles per pack
    • 2.958″ short side width, 3.250″ long side width, 0.125″ thick
    • Less firm than gold paddle
  • 白色，聚乙烯塑料
    每包 5 个桨
    2.958″ 短边宽，3.250″ 长边宽，0.125″ 厚
    不如金桨结实
  • Gold, plastic, nylon reinforced edge
    • 1 paddle per pack
    • 3 7/8″ wide x 2 15/16″ tall
    • More firm than white paddle
  • 金色、塑料、尼龙加强边
    每包 1 个桨
    3 7/8 英寸宽 x 2 15/16 英寸高
    比白桨更结实

HR4-413 Film Sealing Paddle – White 5 pack
HR4-525 3M Sealing Paddle – Gold Each

Hampton 石蜡和硅润滑油 Paraffin & Silicon Oil

Applications  应用
Microbatch crystallization    microbatch 结晶
Features  特征
Under oil crystallization 在油中结晶
Protect the sample from oxidation  保护样品免于氧化
Screen different temperatures without condensation   屏幕不同温度下不凝结
Description   描述 
Oils used for microbatch and modified microbatch crystallization under oil.

使用的油和改性 microbatch microbatch 结晶油。

Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.

Al 是机油的 50 ∶ 50 (体积 ∶ 体积) 混合物的石蜡油和硅油。Al 的石油是其发明者的名字命名 ， Allan D ‘Arcy) 。

Silicon Oil

Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C

Silicon Oil 
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m

Vial Clamp™ – Straight
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.
HR4-670 Vial Clamp - Straight
HR4-670 Vial Clamp – Straight 结晶瓶夹子 each
CrystalWand™ Magnetic
Applications
CrystalCap Magnetic & CrystalCap Copper Magnetic handling tool
结晶帽磁性&结晶帽铜磁性处理工具
Description
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.
HR4-729 CrystalWand Magnetic, Straight
HR4-315 CrystalWand Magnetic, 45° (McMiken Tool)
 
Vial Clamp™ – Curved
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.
HR4-671 Vial Clamp – Curved 45°/135°
HR4-672 Vial Clamp – Curved 110°/70°
Cap Container (empty)

Applications

Holds 30 CrystalCap caps for storage or transport
Features
Black polypropylene box with overlap snap closure
Holds 30 caps with or without Mounted CryoLoops™
Description 
Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.

HR8-016 Cap Container Opened

HR8-016 Cap Container empty  底座盒子 each

18 mm Siliconized Glass Cover Slides

APPLICATIONS 应用

  • Siliconized glass cover slides for hanging & sitting drop crystallization
  • Hanging drop crystallization
  • Sitting drop crystallization
  • Sandwich drop crystallization

用于悬挂和坐滴结晶的硅化玻璃盖玻片
悬滴结晶
坐滴结晶
夹心滴结晶

FEATURES  特征

  • High purity of glass
  • Siliconized, hydrophobic glass surface
  • 0.22 mm & 0.96 mm glass thickness
  • 18 mm glass diameter
  • Circle
  • 0.22 mm glass thickness is UV Compatible (>85% transmission)

玻璃纯度高
硅化疏水玻璃表面
0.22 毫米和 0.96 毫米玻璃厚度
18 毫米玻璃直径
圆圈
0.22 毫米玻璃厚度与紫外线兼容（> 85% 透射率）

12 mm Siliconized Glass Cover Slides HR3-278T Siliconized circle cover slides for Tecan robot
HR3-277 12 mm x 0.22 mm Siliconized circle cover slides
HR3-279 12 mm x 0.22 mm Siliconized circle cover slides
HR8-088 12mmx0.96mmThick Siliconized circle cover slides
HR8-090 12mmx0.96mm Thick Siliconized circle cover slides
22 mm Siliconized Glass Cover Slides HR3-231 22 mm x 0.22 mm Siliconized circle cover slides
HR3-233 22 mm x 0.22 mm Siliconized circle cover slides
HR3-247 22 mm x 0.96 mm Thick Siliconized circle cover slides
HR3-249 22mmx 0.96mm Thick Siliconized circle cover slides
HR3-215 22 mm x 0.22 mm Siliconized square cover slides
HR3-217 22 mm x 0.22 mm Siliconized square cover slides
HR3-223 22mmx0.96mm Thick Siliconized square cover slides
HR3-225 22mmx0.96mm Thick Siliconized square cover slides

Hampton 水晶透明密封带Crystal Clear Sealing Tape

3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)

Hampton HR4-316胶 Super Glue

Loctite® Easy-Squeeze Super Glue Gel

APPLICATIONS

  • Staking Glass Fibers to Brass Specimen Pins.
  • Staking MicroTube to CrystalCap

FEATURES

  • Squeeze grips allow for precise application, keeping fingers glue free
  • Locking cap collar prevents leaks and drying out
  • Bonds more surfaces than ordinary glues, including: metal, CryoLoops, wood, paper, cardboard, vinyl, leather, rubber, cork, ceramic, china, textiles, brick and fingers.

CryoTong™ – Long
Applications

Crystal transfer under cryo temperature
Features

Artery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.

CrystalCap™ Holder
applications
CrystalCap support inside stainless steel dewars
Features
Adjustable heightSupports up to 8 CrystalCaps15 ml vial position for liquid propane500 and 1,000 ml versionsDescription
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.
HR4-707 CrystalCap Holder – 500 ml
HR4-706  Replacement Height Adjustment Tool

Hampton HR8-016 结晶小瓶底座箱 Cap Container empty

发表于由

Hampton HR8-016 结晶小瓶底座箱 Cap Container empty

APPLICATIONS

  • Holds 30 CrystalCap caps for storage or transport

FEATURES

  • Black polypropylene box with overlap snap closure
  • Holds 30 caps with or without Mounted CryoLoops™

DESCRIPTION

Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.

应用
可容纳 30 个 CrystalCap 瓶盖用于储存或运输
特征
黑色聚丙烯盒，带重叠按扣
可容纳 30 个带或不带 Mounted CryoLoops™ 的瓶盖
描述
空的黑色塑料盒，可容纳 30 个 CrystalCap Copper Magnetic HT、CrystalCap Copper Magnetic ALS HT、CrystalCap HT (SPINE)、CrystalCap Magnetic 或 CrystalCap Copper Magnetic，不带小瓶。 用于运输不需要冷冻的盖子或在同步加速器旅行后将用过的盖子送回家。 Cap Container 设计用于仅与 Caps 一起使用，不能容纳小瓶。

HR8-016 Cap Container empty  each

Hampton蛋白结晶小瓶和结晶环底座 CrystalCap

发表于由

Hampton蛋白结晶小瓶和结晶环底座 CrystalCap

Applications

Cryocrystallography  低温结晶学

Features

SSRL style sample mount for cryocrystallography
CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers

Description
The CrystalCap is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SSRL style sample mounts. The CrystalCap attaches to a magnetic CrystalCap Vial and Magnetic Goniometer Base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.

The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage.The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.

The conical shape with ledge is compatible with SSRL style grippers, auto mounters and sample handlers.

Compatible with the following Synchrotron Radiation Beamlines

North & South America
• The Advanced Light Source, Berkeley, California ALS 4.2.2, ALS 11.3.1, ALS 12.2.2, ALS 12.3.2
• The Advanced Photon Source, Argonne, Illinois APS 14-BM-C BioCARS, APS 14-ID-B BioCARS
• Cornell High Energy, Synchrotron Source, Ithaca, New York CHESS A1, CHESS F1
• Canadian Light Source, Saskatchewan, Canada, CLS 08ID-1, CLS 08B1-1
• National Synchrotron Light Source, Upton, New York NSLS X4C
• Stanford Synchrotron Radiation Laboratory, Menlo Park, California SSRL BL7-1, SSRL BL9-1, SSRL BL9-2, SSRL BL11-1, SSRL BL12-2, SSRL BL14-1

Asia & Australia
• Shanghai Synchrotron Radiation Facility, Shanghai, China SSRF BL17U1
• National Synchrotron Radiation Research Center, Taiwan NSRRC BL13B1, NSRRC BL13C1
• Pohang Accelerator Laboratory, Pohang, South Korea PAL 2D, PAL 5C, PAL 7A
• Photon Factory, Tsukuba, Japan PF BL-5A, PF BL-17A, PF AR-NW12A
• Super Photon ring-8 GeV, Japan SPRING-8 BL12B2, SPRING-8 BL24XU, SPRING-8 BL26B1, SPRING-8 BL26B2, SPRING-8 BL32B2, SPRING-8 BL32XU, SPRING-8 BL38B1, SPRING-8 BL41XU, SPRING-8 BL44B2, SPRING-8 BL44XU

CrystalCap

CrystalCap & Vial

CrystalCap

Hampton蛋白结晶小瓶和结晶柱底座 CrystalCap™

CAT NO NAME DESCRIPTION
HR4-733 CrystalCap with Vial – 60 pack
HR4-902 CrystalCap without Vial – 60 pack
HR4-904 CrystalCap Vial Vial only – 30 pack

4 Related Items 相关产品
18 mm Mounted CryoLoop™ – 20 micron
CrystalWand™ Magnetic
Vial Clamp™ – Straight
Vial Clamp™ – Curved