硫代硫酸钠防止分子间二硫键 -促进晶体生长和避免形成不稳定和弱衍射晶体

Sodium thiosulfate to prevent intermolecular disulfide bridges

The presence of thiosulfate in the protein solution was essential to promote crystal growth and to avoid the formation of unstable and weakly diffracting crystals(1); this is likely to be a consequence of the intrinsic capability of the reduced thiol group of the active-site cysteine to form disulfide bridges, leading to the destabilization of the protein native structure. Sulfane sulfur-donor compounds such as Na2S2O3 are likely to either keep the protein in the persulfurated form or to prevent intermolecular disulfide bridges leading to unfolding and aggregation

硫代硫酸钠防止分子间二硫键
蛋白质溶液中硫代硫酸盐的存在对于促进晶体生长和避免形成不稳定和弱衍射晶体至关重要 (1);这可能是活性位点半胱氨酸的还原硫醇基团形成二硫键的内在能力的结果,导致蛋白质天然结构的不稳定。硫烷硫供体化合物(如 Na2S2O3)可能使蛋白质保持过硫化形式或防止分子间二硫键导致展开和聚集 。

(2). References 参考文献

1. Crystallization and preliminary crystallographic characterization of LmACR2, an arsenate/antimonate reductase from Leishmania major. D. Bisacchi, Y. Zhou, B. P. Rosen, R. Mukhopadhyay and D. Bordo. Acta Cryst. (2006). F62, 976-979. 2. Bordo, D., Forlani, F., Spallarossa, A., Colnaghi, R., Carpen, A., Bolognesi, M. & Pagani, S. (2001). Biol. Chem. 382, 1245–1252.

Benzylkonium chloride-膜蛋白和可溶性蛋白用阳离子表面活性剂

Benzylkonium chloride-膜蛋白和可溶性蛋白用阳离子表面活性剂

Try benzylkonium chloride (Fluka 12060). This cationic surface active agent has been reported to be useful as a crystallization additive with membrane proteins and may be useful for soluble proteins. We’ve been using it in the drop between 1 and 3% w/v in water. Try a 10% w/v stock solution in water and dilute into the drop to 1-3%.

苄基氯铵
试试苄基氯铵 (Fluka 12060)。 据报道,这种阳离子表面活性剂可用作膜蛋白的结晶添加剂,并可用于可溶性蛋白。 我们一直在水中使用 1% 到 3% w/v 的浓度。 尝试在水中使用 10% w/v 的储备溶液,然后将其稀释至 1-3%。

Crystal Screen as an additive screen 附加屏幕

Crystal Screen as an additive screen 附加屏幕

Although Hampton Research does offer a specifically formulated Additive Screen (HR2-428), here is a tip when one already has a sparse matrix screen or two laying about the lab. When screening additives try adding 50 microliters of each Crystal Screen reagent to 950 microliters the “best” crystallization conditions thus far in order to see if any of the reagents in Crystal Screen might serve as good additives. Crystal Screen 2 is an especially good kit for this technique since Crystal Screen 2 contains numerous divalent cations, Jeffamine® Reagent, and a few other “novel” agents. Jeffamine® is a registered trademark of the Huntsman Petrochemical Corporation

Reference 参考文献

Crystallization of foot-and-mouth disease virus 3C protease: surface mutagenesis and a novel crystal-optimization strategy. Acta Crystallogr D Biol Crystallogr. 2005 May;61(Pt 5):646-50. Epub 2005 Apr 20. Birtley JR1, Curry S.

水晶屏幕作为附加屏幕
尽管 Hampton Research 确实提供了一种专门配制的添加剂屏幕 (HR2-428),但当一个人在实验室周围已经有一个或两个稀疏矩阵屏幕时,这里有一个提示。 当筛选添加剂时,尝试将 50 微升的每种 Crystal Screen 试剂添加到迄今为止“最佳”结晶条件的 950 微升中,以查看 Crystal Screen 中的任何试剂是否可以作为良好的添加剂。 Crystal Screen 2 是该技术特别好的套件,因为 Crystal Screen 2 包含大量二价阳离子、Jeffamine® 试剂和一些其他“新型”试剂。 Jeffamine® 是 Huntsman Petrochemical Corporation 的注册商标。

 

What additive to use  蛋白结晶用用什么添加剂

What additive to use  蛋白结晶用用什么添加剂

When trying to decide which additive might be useful during crystallization, try the following. If one has crystals and wants to try using additives to improve the crystal size or quality go back to the initial crystallization screening plates. Review the plates, looking for conditions where no precipitate nor crystals were/are observed. Now, review the results, looking for a common reagent ingredient present where no precipitant or crystals are found. For example, one might find that all drops with isopropanol remained clear. One could then try adding isopropanol to the current crystallization condition to see if the isopropanol could improve the crystal size and/or quality. If one observes a difference in the crystal in the presence of isopropanol, then one might consider evaluating other additives in the class of alcohols such as ethanol, methanol, tert-butanol and others. If one has no crystals, but plenty of precipitate, phase separation and clear drops, follow the above analysis and try adding the common reagent ingredient found in clear drop to those drops which contained precipitate or phase separation. It is possible this agent could improve or at least manipulate sample solubility. The above tip was submitted from Jarmila Jancarik from the laboratory of Sung Ho Kim at the University of California Berkeley. Thank you Jaru! When using this approach it might be reasonable to discern between concentration independent and dependent precipitation when trying to decide which agent to pursue as an additive. Try evaluating the concentration independent agents first and then look at the other agents if sample quantity permits. For example, if one observe precipitate in 15 to 40% PEG but not in 5 to 10% PEG, it might simply be a concentration. However, if one observes no precipitate in 45 to 60% v/v MPD one could guess that MPD is a reasonable agent to evaluate as an additive.

当试图决定在结晶过程中哪种添加剂可能有用时,请尝试以下方法。如果有晶体并想尝试使用添加剂来改善晶体尺寸或质量,请返回最初的结晶筛选板。检查板,寻找没有观察到沉淀或晶体的条件。现在,查看结果,寻找没有发现沉淀剂或晶体的常见试剂成分。例如,人们可能会发现所有含有异丙醇的液滴都保持透明。然后可以尝试将异丙醇添加到当前的结晶条件中,以查看异丙醇是否可以改善晶体尺寸和/或质量。如果在异丙醇存在下观察到晶体的差异,那么可以考虑评估醇类中的其他添加剂,例如乙醇、甲醇、叔丁醇等。如果没有晶体,但有大量的沉淀、相分离和透明液滴,请按照上述分析,尝试将透明液滴中常见的试剂成分添加到含有沉淀或相分离的液滴中。该试剂有可能改善或至少控制样品溶解度。上述提示由加州大学伯克利分校 Sung Ho Kim 实验室的 Jarmila Jancarik 提交。谢谢雅鲁!当使用这种方法时,在尝试决定使用哪种试剂作为添加剂时,区分与浓度无关的沉淀和依赖沉淀可能是合理的。尝试先评估与浓度无关的试剂,然后在样本数量允许的情况下查看其他试剂。例如,如果观察到 15% 到 40% PEG 中的沉淀,但 5% 到 10% PEG 中没有,则它可能只是一种浓度。然而,如果在 45 至 60% v/v MPD 中没有观察到沉淀,则可以猜测 MPD 是一种可以作为添加剂进行评估的合理试剂。

Crystal Positioning Systems(CPS)

Crystal Positioning Systems(CPS)简介

美国Crystal Positioning Systems(CPS)是专业的晶体设备生产商,有兼容SSRL和ALS机器人的样品槽、样品储存和转移用的工具、同步加速器相关工具等,还可根据客户的要求进行产品定制。

ALL CATEGORIES   所有类别
10 UNIVERSAL V-1 Pucks *RainbowUnipucks   10 个通用 V-1 Pucks *RainbowUnipucks
Thermal ShipperCrystallography at Room Temperature / Controlled Humidity  室温/受控湿度下的热托运晶体学
Bent Cryo-TongPuck Tools
Heating ShieldSynchrotron Tools    加热屏蔽同步加速器工具
Sample Storage Cassette non CopperSSRL Cassettes and Tools     样品存储盒非 Copper SSRL 盒和工具
Sample Pin Bases non-CopperSample Mounts and Bases
CX100 Hard Shell Square Grey Shipping CaseTaylor Wharton and shipping accessories  CX100 硬壳方形灰色运输箱Taylor Wharton 和运输配件
Replacement Ring MagnetsReplacement parts  更换环形磁铁更换零件
ALS Puck ALS Pucks    ALS Puck
Crystal Positioning Systems(CPS)

货号 产品名称 规格 描述
CP-111-021 Universal V1- Puck 通用型圆盘样品槽
CP-111-022 Double Puck Loading Dewar with Lid 液氮箱
CP-111-026 Puck Wand Base Holder Tool 圆盘样品槽底座转移工具
CP-111-027 Puck Dewar Loading Tool 样品槽转移工具
CP-111-028 Puck Separator Tools (base removal platform and push tool) 样品槽分离工具
CP-111-030 Bent Cryo-Tong 样品槽钳
CP-111-065 One-Piece Shelved Puck Shipping Cane 样品槽架
CP-111-049 CX100 Dry Shipper, with Canister & Shipping Case 液氮罐+运输箱

Molecular Dimensions 蛋白结晶培养箱(立式)

Molecular Dimensions 蛋白结晶培养箱(立式)

上海金畔生物代理Molecular Dimensions品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Molecular Dimensions官网或者咨询我们获取更多相关Molecular Dimensions品牌产品信息。

Temperature controlled cabinets specifically designed for crystal growth.

All have temperature programming and can be further customised with accessories such as lighting, glazed door, extra shelves, instrument cable ports and humidity control. These incubators need only a small floor space. They have a white interior with easily-cleaned plastic-coated wire shelves, adjustable at 35mm intervals to provide maximum flexibility of positioning. Temperature control is via an electronic controller with digital display, over/under temperature safety cut-outs and warning alarms. The doors are lockable and have a magnetic seal. The large workspace door can be opened wide to provide full-width access.

Molecular Dimensions Cooled Crystallisation Incubators are an economical alternative to building temperature-controlled rooms, and provide much more precise control of crystal growth temperature.

Features:

  • 100, 160, 230, and 400-litre models
  • Temperature range 0°C to 50°C
  • Temperature accuracy ± 0.5°C for precise crystal growth conditions
  • Virtually vibration free for undisturbed experiments
  • Easy-to-use control panel
  • Small foot-print maximises precious floor space in the laboratory

专为晶体生长而设计的温控柜。
所有产品都具有温度程序,并可进一步定制照明、玻璃门、额外搁板、仪器电缆端口和湿度控制等配件。这些孵化器只需要很小的占地面积。它们的内部为白色,带有易于清洁的塑料涂层金属丝架,可按 35 毫米的间隔进行调节,以提供最大的定位灵活性。温度控制是通过带有数字显示、超温/超温安全切断和警告警报的电子控制器进行的。门可上锁并带有磁性密封。大工作区门可以打开很宽,以提供全宽的访问。

分子尺寸冷却结晶培养箱是建造温控室的经济替代方案,可以更精确地控制晶体生长温度。

特征:

100、160、230 和 400 升型号
温度范围 0°C 至 50°C
温度精度 ± 0.5°C,适用于精确的晶体生长条件
对于不受干扰的实验几乎没有振动
易于使用的控制面板
占地面积小,可最大限度地利用实验室宝贵的占地面积

400 litre internal volume cooled crystallization incubator.

Precise and constant temperature
Temperature is controlled electronically. A continuously-running fan guarantees high accuracy of temperature control throughout the cabinet interior and over time, according to DIN-58945.
Heating and cooling
The continuously adjustable fan-mounted electrical resistance heater has low thermal “drag”. It is controlled by a solid-state relay, avoiding steps and relay contact breaking. This design provides maximal accuracy of temperature with “coasting” practically eliminated. The air-cooled refrigeration unit uses CFC-free refrigerant and has a highly efficient heat exchanger. Solenoid valve-bypass operation ensures smooth and continuous running, with minimal vibration.
Easy-to-use, programmable temperature control
A temperature program controller allowing up to 70 set points is fitted as standard. Programing is simple, with a clear digital display of set and actual temperature. Both real time and process time controlled dual set-point temperature programs are available. Set point values or a freely programable ramp function can be selected.
Double security for sample and incubator
The incubators cannot over-heat or over-cool. In the event of a failure, a standby controller with a separate sensor takes over temperature control. Additionally an alarm is sounded. A mechanical safety switch with factory-adjusted release temperature (TWB DIN12880, class 2) protects the incubator against incorrect adjustment of the temperature selector.

400 升内部容积冷却结晶培养箱。

精确恒温
温度由电子控制。根据 DIN-58945,连续运行的风扇可确保整个机柜内部和随时间推移的高精度温度控制。
加热和冷却
连续可调的风扇安装电阻加热器具有低热“阻力”。它由固态继电器控制,避免了步骤和继电器触点断开。这种设计提供了最大的温度精度,实际上消除了“惯性”。风冷式制冷机组采用无CFC制冷剂,具有高效换热器。电磁阀旁通操作确保平稳连续运行,振动最小。
易于使用的可编程温度控制
标配最多可设置 70 个设定点的温度程序控制器。编程简单,设置和实际温度的数字显示清晰。提供实时和过程时间控制的双设定点温度程序。可以选择设定点值或可自由编程的斜坡功能。
样品和培养箱双重安全
培养箱不能过热或过冷。在发生故障时,带有独立传感器的备用控制器接管温度控制。此外还会发出警报。带有出厂调节释放温度(TWB DIN12880,2 级)的机械安全开关可保护培养箱免受温度选择器的错误调节。

MD5-01 Cooled Crystallization Incubator 400 litre 1
MD5-02 Cooled Crystallization Incubator 230 litre 1
MD5-03 Cooled Crystallization Incubator 160 litre 1
MD5-04 Cooled Crystallization Incubator 100 litre 1

Molecular Dimensions MD1-13 3D Structure Screen 48 x 10 mL

Molecular Dimensions MD1-13 3D Structure Screen 48 x 10 mL

上海金畔生物代理Molecular Dimensions品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Molecular Dimensions官网或者咨询我们获取更多相关Molecular Dimensions品牌产品信息。

The 3D Structure Screen is formulated for growing protein crystals in the metastable zone using the vapour diffusion technique.

This method is presented in the 3D Structure Screen as an optimized sparse matrix crystal growth screen which allows the 24 “nucleation” conditions of the Mini Screen and 24 “backed-off” conditions for crystal growth to be tried. Formatted for HT blocks as the Heavy + Light (3D Structure Screen) Twin Pack HT-96.

Features of 3D Structure Screen:

Separate nucleation from crystal growth.
A simple method for growing crystals in the metastable zone.
Obtain much larger and better diffracting crystals compared to conventional methods.
This product is manufactured under an exclusive licence from Imperial College of Science, Technology and Medicine, London U.K.

3D Structure Screen 专为使用蒸汽扩散技术在亚稳态区域中生长蛋白质晶体而设计。

这种方法在 3D 结构屏幕中显示为优化的稀疏矩阵晶体生长屏幕,它允许尝试使用 Mini Screen 的 24 个“成核”条件和 24 个“回退”条件进行晶体生长。 为 HT 块格式化为 Heavy + Light(3D 结构屏幕)Twin Pack HT-96。

3D结构画面的特点:

将成核与晶体生长分开。
在亚稳区中生长晶体的简单方法。
与传统方法相比,获得更大更好的衍射晶体。
本产品是在英国伦敦帝国理工学院的独家许可下生产的。

References:  参考文献
Chayen, N. & Saridakis, E. Protein crystallization for genomics: towards high-throughout optimization techniques. Acta Cryst. D58: 921-927 (2002)
Chayen, N. & Saridakis, E. Improving protein crystal quality by decoupling nucleation and growth in vapor diffusion. Protein Science 9(4): 755-757 (2000)
Charron, C et al. Crystallization and preliminary X-ray diffraction data of the second and archaebacterial-type aspartyl-tRNA synthetase from Thermus thermophilus. Acta Cryst. D57: 1177-1179 (2001)

MD1-13 3D Structure Screen 48 x 10 mL
MD1-13-ECO 3D Structure Eco Screen 48 x 10 mL
MD1-35 Heavy + Light (3D Structure Screen) Twin Pack HT-96 48 x 1 mL (x 2)
MD1-35-ECO Heavy + Light (3D Structure Screen) Twin Pack HT-96 Eco Screen 48 x 1 ml (x 2)
MD1-35-FX Heavy + Light (3D Structure Screen) Twin Pack FX-96 pre-filled plate 48 x 100 µL (x 2)

Molecular Dimensions MD15-W12-T Wizard Classic 1 & 2

Molecular Dimensions MD15-W12-T Wizard Classic 1 & 2

规格:96 x 10 ml

上海金畔生物代理Molecular Dimensions品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Molecular Dimensions官网或者咨询我们获取更多相关Molecular Dimensions品牌产品信息。

The Wizard™ Classic line of random sparse matrix screens is designed to increase your probability of producing crystals during the coarse screening phase when crystallizing biological macromolecules (proteins, nucleic acids, peptides, and combinations thereof). The Wizard Classic reagents are proven to be a highly effective starting point in the screening of biological macromolecules. The Wizard Classic formulations include a large range of crystallants, buffers, and salts covering a broad range of crystallization space at pH levels from pH 4.5 to pH 10.5.

Wizard™ Classic 系列随机稀疏矩阵筛选旨在提高在粗筛选阶段在结晶生物大分子(蛋白质、核酸、肽及其组合)时产生晶体的可能性。 事实证明,Wizard Classic 试剂是筛选生物大分子的高效起点。 Wizard Classic 配方包括多种结晶剂、缓冲剂和盐,涵盖了从 pH 4.5 到 pH 10.5 的广泛结晶空间。

Overall structure of the EcFtsZ(L178E)–GDP complex obtained with Wizard Classic 3 condition 354

Molecular Dimensions distributes Wizard Crystallisation kits on behalf of Rigaku Reagents.

References:
1. Ueda M, Shimosaka M, Arai R. Expression, purification, crystallization and X-ray diffraction analysis of ChiL, a chitinase from Chitiniphilus shinanonensis. Acta Crystallogr F Struct Biol Commun. 2015; 71(Pt 12): 1516-1520
2. Moriyama S, Nishio K, Mizushima, T. Structure of glyoxysomal malate dehydrogenase (MDH3) from Saccharomyces cerevisiae. Acta Cryst. 2018; F74: 617-624
3. Jeong, Y.C., Lee, K.S. Overexpression, purification, crystallization and preliminary X-ray crystallographic characterization of the receiver domain of the response regulator PhoP from Enterococcus faecalis ATCC 29212. Appl Biol Chem. 2019; 62, 66
4. Schumacher, MA, Ohashi, T, Corbin, L & Erickson, HP. High-resolution crystal structures of Escherichia coli FtsZ bound to GDP and GTP. Acta Cryst. 2020; 76(2): 94-102

EBSR-100- Emerald Screen Single Reagent 100 ml
EBSR-250- Emerald Screen Single Reagent 250 ml
MD15-W12-B Wizard Classic 1 & 2 HT-96 96 x 1.7 ml
MD15-W12-T Wizard Classic 1 & 2 (10mL) 96 x 10 ml
MD15-W1-T Wizard Classic 1 (10mL) 48 x 10 ml
MD15-W2-T Wizard Classic 2 (10mL) 48 x 10 ml
MD15-W34-B Wizard Classic 3 & 4 HT-96 96 x 1.7 ml
MD15-W34-T Wizard Classic 3 & 4 (10mL) 96 x 10 ml
MD15-W3-T Wizard Classic 3 (10mL) 48 x 10 ml
MD15-W4-T Wizard Classic 4 (10mL) 48 x 10 ml
MD15-W-BUNDLE Wizard Tube Bundle Special (10ml) 1
MD15-W-BUNDLE-HT96 Wizard Tube Bundle Special (HT96) 1

Molecular Dimensions MD1-46 Morpheus 96 x 10 ml

Molecular Dimensions MD1-46 Morpheus 96 x 10 ml

上海金畔生物代理Molecular Dimensions品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Molecular Dimensions官网或者咨询我们获取更多相关Molecular Dimensions品牌产品信息。

A 96 condition protein crystallization screen with original chemistry incorporating a range of low molecular weight ligands found ordered in more than 33000 PDB structures. Developed and utilized in the world-renowned Laboratory of Molecular Biology, (Cambridge, UK) – Morpheus® carries on the tradition of being original and dynamic. This unique screen aims to unlock novel chemical space previously inaccessible using conventional screens.

96 条件蛋白质结晶筛选与原始化学结合发现在超过 33000 个 PDB 结构中发现的一系列低分子量配体。 在世界著名的分子生物学实验室(英国剑桥)开发和使用 – Morpheus® 继承了原创和动态的传统。 这种独特的屏幕旨在解锁以前使用传统屏幕无法进入的新型化学空间。

An IUCr Webinar describing the formulation of the Morpheus® screens is available hereMolecular Dimensions, as well as a webinar describing the four-corner method for optimizing crystals obtained in Morpheus® conditions. The kit is presented as a 96 condition screen.

Features of Morpheus®:

  • Simple and effective 3D grid design covering a range of pH, PEGs and salt additives.
  • 49 low molecular weight ligands promote both initial crystal formation and lattice stability.
  • Ideal for membrane proteins (contains PEGS and low salt)
  • Reduced crystal “stress” – all conditions are cryo-protected.
  • Derived from extensive data mining of over 33,000 PDB entries.
  • Available in both 10 mL tube and 96 condition deep well block formats.

This product has been designed and developed by Fabrice Gorrec, in collaboration with the scientists at the Medical Research Council Laboratory of Molecular Biology (LMB) at Cambridge and is manufactured exclusively under license by Molecular Dimensions Limited.

References  参考文献

Witek, W., Sliwiak, J. & Ruszkowski, M. Structural and mechanistic insights into the bifunctional HISN2 enzyme catalyzing the second and third steps of histidine biosynthesis in plants. Sci Rep 11: 9647 (2021)

Kozak, S et al. Homogeneously N-glycosylated proteins derived from the GlycoDelete HEK293 cell line enable diffraction-quality crystallogenesis D76: 1244-1255 (2020)

Gorrec, F., & Löwe, J. Automated Protocols for Macromolecular Crystallization at the MRC Laboratory of Molecular Biology 131: 55790 (2018)

Sonani, Ravi R et al. An improved crystal structure of C-phycoerythrin from the marine cyanobacterium Phormidium sp. A09DM. 135(1): 65-78 (2018)

Gorrec, F. Protein crystallization screens developed at the MRC Laboratory of Molecular Biology 21(5): 819-825 (2016)
Gorrec, F. The MORPHEUS protein crystallization screen. Journal Applied Crystallography 42: 1035-42 (2009)

MD1-123 Morpheus Complete 1 kit
MD1-124 Morpheus Complete HT-96 1 kit
MD1-129 Morpheus Fusion 96 x 10 ml
MD1-130 Morpheus Fusion HT-96 96 x 1 ml
MD1-130-FX Morpheus Fusion FX 96 x 100 µl
MD1-46 Morpheus® 96 x 10 ml
MD1-47 Morpheus® HT-96 96 x 1 ml
MD1-47-FX Morpheus® FX-96 pre-filled plate 96 x 100 µl
MD1-47-GREEN Morpheus® HT-96 Green Screen 96 x 1 ml
MD1-76 Power Combo Value Pack (Morpheus® & MIDASplus™) 192 x 10 ml
MD1-76-HT Power Combo Value Pack (Morpheus® & MIDASplus™) HT-96 192 x 1 mL
MD1-93 The Morpheus® Additive Screen 96 x 100 µL
MDSR-46- Morpheus® Single Reagent 100 ml
MDSR-47- Morpheus® HT-96 Single Reagent 100 ml

Molecular Dimensions MD1-106 MIDASplus

Molecular Dimensions MD1-106 MIDASplus

上海金畔生物代理Molecular Dimensions品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Molecular Dimensions官网或者咨询我们获取更多相关Molecular Dimensions品牌产品信息。

MIDASplus™ is an updated version of the original MIDAS screen with new precipitants so let you explore chemical space even further. Developed in the laboratory of Dr Clemens Grimm at the University of Wurzburg, Germany.

MIDASplus™ 是原始 MIDAS 屏幕的更新版本,带有新的沉淀剂,让您进一步探索化学空间。 由德国维尔茨堡大学 Clemens Grimm 博士的实验室开发。

Examples of protein crystals grown using conditions from MIDASplus.

Features of MIDASplus™:

  • Now includes the addition of PPGBA’s to increase the diversity of polymers.
  • Ideal for both protein, protein/protein complexes, protein / nucleic acid complexes, and sensitive macromolecular complexes.
  • Narrow range of pH and salt concentrations centered on physiological values.
  • Every condition contains at least one alternative polymeric precipitant.
  • Compatible with liquid handling robots.

MIDASplus™ is manufactured and distributed under an exclusive license with Dr. C. Grimm and Prof. Dr. U. Fischer.

References

Grimm, C., Chari, A., Reuter, K. & Fischer, U. (2010). Acta Cryst. D66, 685-697

Product # Product Name Unit Size
MD1-106 MIDASplus™ 96 x 10 ml
MD1-107 MIDASplus™ HT-96 96 x 1 ml
MD1-107-FX MIDASplus™ FX-96 pre-filled plate 96 x 100 µl
MD1-126 MIDASplus™ OPTIMAX 1 kit
MD1-76 Power Combo Value Pack (Morpheus® & MIDASplus™) 192 x 10 ml
MD1-76-HT Power Combo Value Pack (Morpheus® & MIDASplus™) HT-96 192 x 1 ml
MDSR-106- MIDASplus™ Single Reagent 100 ml
MDSR-107- MIDASplus™ HT-96 Single Reagent 100 ml